Stainless rack mounts?

[Chauncey Matthews]

I need a pair of stainless rack mounts, preferably like the hourglass shaped ones available. I've looked in all the usual places...anybody got a source or a good substitute?
Maybe something like a round 5mm coupling nut is out there somewhere, but I haven't found it.
Any ideas?

[EricKeller]

don't remember seeing them anywhere. That and lowrider mounts seem to be just about the only brazeon not made in stainless. I suspect I could fake a pair of them on the lathe if I was desperate. For more than a few, a radius cutter toolpost for the lathe isn't that hard to make.

[Jess Couch]

Ceeway sells them in SS

[tmarsh]

They are a little hard to find on the site, but you can find them on this page, about 2/3 of the way down. Or hit the page and search for "294S Pannier Boss".

[Chauncey Matthews]

Perfect!
I had checked Ceeway, but missed them.
Thanks guys.

[EricKeller]

I never think of Ceeway, I see they have some low mount dropouts I should have ordered instead of the paragons.

[Chauncey Matthews]

I never think of Ceeway, I see they have some low mount dropouts I should have ordered instead of the paragons.

Those are from Naked, you can get them directly from Sam W's site.

[Eric Estlund]

Is Ceeway carrying the Boomerang's now? The DBH on Peter's site is a different shape. I know he carries select Paragon products.

[Chauncey Matthews]

The boomerangs were recently revamped...at least the drops I got from Sam this summer look like the ones on the Ceeway site.

[Rody]

Chauncey,

Gotta ask, what's keeping you from making them yourself?

Seems like 30 minutes on the lathe beats waiting for a shipment from England.

rody

[Chauncey Matthews]

Well, if we had some eggs we could have some bacon and eggs...if we had some bacon. ;)