Likes: 0
Fausto
Big round chainstays
Did I miss something Marceloish that's commercially available? I'm looking at putting together a frame with fatish pipes and wanna use round stays. Something like Kirk's JKS CS's are svelte with their larger than normal southern terminus, but those are understandably his proprietary deal.
laughter has no foreign accent.
Burnum Upus Quadricepus
maybe contact kp?
Pacenti's own brand has similar chainstays... haven't seen anything either from the usual sources jason.
Slide to the back
If you are looking for
1.0" chain stays, True Temper has them. Talk about massive! We finally gave up on getting well designed 7/8" chain stays from Columbus or Reynolds when we lost Ishiwata as a supplier of custom tubing. So we had Reynolds make us a whole bunch of custom 7/8" chain stays from some of the last 531 plugs they had. They should last us until retirement. Yes, it is really hard to find well designed bicycle tubing. Ah, well.
Tom Kellogg
Rides bikes, used to make 'em too.
Spectrum-Cycles.com
Butted Ti Road, Reynolds UL, Di2, QuarQ, Conour lite, SP Zero
Steel Cross, X-7, Crank Bros, Concour Lite, Nemesis, Grifo
Steel Piste, D-A Piste, PD-7400, Concour lite, Zipp 404
http://kapelmuurindependent.be
Shortest TFC Member (5'6 3/4") & shrinking
Administrator
i have a boatload of fully round 531 chainstays from a
parcel reynolds sent me about 7 years ago. if anyone
needs any plmk atmo.
Jerseys Too Tight
I'd like something like this, too. ø22.2 big round chainstays, with a 100mm long swage down to ø15mm. Double butted 0.8/0.6 with the transition about a third of the way in, 450mm long.
That would make me tres happy.
FRAMEBUILDING PARTS FOR SALE!
Paceline
Peter at Ceeway has: "...cromoly 22.2mm x 0.75mm single bend tapered to 14mm, approx 440mm"
I think 0.75 is preferable to 0.6 for Tig'ing to dropouts....
Ewen Gellie
Melbourne Australia
full-time framebuilder, Mechanical Engineer, (Bach. of Eng., University of Melbourne)
[url]www.gelliecustombikeframes.com.au[/url]
[URL="http://instagram.com/gellie_custom_bikes"]http://instagram.com/gellie_custom_bikes[/URL]
Shut up legs
I have a shit load of the Serotta CSI chain stays with the reverse S-bend and pre-slotted & capped on the DO end. I don't remember where I got 'em but they're nice units.
"It's better to not know so much than to know so many things that ain't so." -- Josh Billings, 1885
A man with any character at all must have enemies and places he is not welcome—in the end we are not only defined by our friends, but also those aligned against us.
Fausto
These are supposed to be TT OX-Plat (straight @ 22mm). I'm assuming they were custom drawn for Lance because none of my usual TT sources have 'em.
laughter has no foreign accent.
VSalon NAHBS-ista
Are you only looking for one set? If not, try calling the guys are Reynolds, they will custom make tubes in the 25-30 set range.
DW
Posting Permissions
Reply With Quote
Bookmarks