User Tag List

Results 1 to 10 of 10

Thread: Carbon tubing source

  1. #1
    Join Date
    Oct 2017
    Location
    Bakersfield
    Posts
    68
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Carbon tubing source

    I've been wanting to build a frame using a carbon ST and possibly HT as well. I've searched and the only source I've found is Rockwest Composites. I think I've heard that ENVE also has carbon tubing as well. Any other reliable sources I should look for?

    Thanks.

    Brandon
    Brandon Poser
    BAHL Cycle Works
    brandon@bahlcycle.com
    www.bahlcycle.com
    Instagram: @bahlcycle

  2. #2
    Join Date
    May 2010
    Location
    Chicago
    Posts
    2,993
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    I know Nate Zukas does carbon seat tubes but I don't know how often he comes by here. You can get in touch with him via his website or IG.

  3. #3
    Join Date
    Jul 2008
    Location
    Khen-Tuck-ee, USA
    Posts
    2,285
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Bikes and Planes go way back, the Wright Bros. shopped here.

    https://www.aircraftspruce.com/categ...rbonfiber.html

  4. #4
    Join Date
    Mar 2009
    Location
    worlds biggest island
    Posts
    1,925
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Quote Originally Posted by BigPoser View Post
    I've been wanting to build a frame using a carbon ST and possibly HT as well. I've searched and the only source I've found is Rockwest Composites. I think I've heard that ENVE also has carbon tubing as well. Any other reliable sources I should look for?

    Thanks.

    Brandon
    There are plenty of companies that do roll wrapped uni tubing in a heap of different diameters and wall thicknesses/ layup schedules. The two you mentioned are probably the most popular. Google is a rabbit hole for suppliers.
    Bill Fernance
    Bicycle Shop Owner
    Part Time Framebuilder
    Bicycle Tragic

  5. #5
    Join Date
    Jun 2008
    Location
    Seattle, WA
    Posts
    2,396
    Post Thanks / Like
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Rockwest and Enve are good places to start.
    Steve Hampsten
    www.hampsten.blogspot.com
    “These are my principles. If you don’t like them, I have others.”

  6. #6
    Join Date
    Aug 2011
    Location
    Beechworth, VIC
    Posts
    2,524
    Post Thanks / Like
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Why not make it yourself?

    Roll wrapping a seat tube works well since there is no torsional stress on it.

    A 27 mm aluminium round bar plus a layer of 0.5mm polypropylene makes an excellent mandrel for a 27.2 ID seat tube.

    Carbon is hell on tools, I always have a base layer of something that is easy to work anywhere you are going to do so such as the top half of the seatpost and both ends of the headtube. I use the perfectly wonderful BioMid recrystallised cellulose for this but there are other materials available.

    Easy composites in the UK have a good video on roll wrapping:



    Headtubes are a little more difficult since they do have torsional stress on them, you could do a roll wrapped base tube then add some layers at 45 / 45. UPVC plumbing tubing (plus polypropylene layer) makes an OK mandrel for a head tube but it cannot be used at high temperature.

    Lastly, make sure you use a good quality laminating epoxy, not a boat building epoxy (eg West System), the difference is night and day. I use Kinetix R246 but that's an Australian brand, find something local and look for a high glass transition temperature with elevated temperature post cure.

    Assuming a controlled temperature curing oven is a bit of a stretch, you can achieve the post cure by leaving the tube in the car on a hot day.


    Advanced version: if you re-arrange the layup at the top of the seat tube to minimise the carbon fibres in the hoop direction you can make it so it compresses under the seatpost clamp sufficiently to hold the post without being slotted. It took me a couple of goes to get this right but it is now my standard technique
    Mark Kelly

  7. #7
    Join Date
    Oct 2017
    Location
    Bakersfield
    Posts
    68
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Thanks everyone. I've been in touch with Rockwest as well as Origen who bought all of ENVE's tubing and tooling.

    For those of you that have done this, what do you use for your water bottle bosses?
    Brandon Poser
    BAHL Cycle Works
    brandon@bahlcycle.com
    www.bahlcycle.com
    Instagram: @bahlcycle

  8. #8
    Join Date
    Mar 2009
    Location
    worlds biggest island
    Posts
    1,925
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Quote Originally Posted by BigPoser View Post
    Thanks everyone. I've been in touch with Rockwest as well as Origen who bought all of ENVE's tubing and tooling.

    For those of you that have done this, what do you use for your water bottle bosses?
    I use rivnuts with a carbon support. I hole saw a round offcut off a tube and bond to downtube and seat tube as the support then fix in rivnut. You can also just layup some extra carbon where you are going to place your bottle cages.
    Bill Fernance
    Bicycle Shop Owner
    Part Time Framebuilder
    Bicycle Tragic

  9. #9
    Join Date
    Oct 2017
    Location
    Bakersfield
    Posts
    68
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Quote Originally Posted by progetto View Post
    I use rivnuts with a carbon support. I hole saw a round offcut off a tube and bond to downtube and seat tube as the support then fix in rivnut. You can also just layup some extra carbon where you are going to place your bottle cages.
    Ah ok. I figured I could use stainless rivnuts but thought it might okay to use epoxy, then rivnut.

    Would that not be adequate?
    Brandon Poser
    BAHL Cycle Works
    brandon@bahlcycle.com
    www.bahlcycle.com
    Instagram: @bahlcycle

  10. #10
    Join Date
    Mar 2009
    Location
    worlds biggest island
    Posts
    1,925
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Carbon tubing source

    Quote Originally Posted by BigPoser View Post
    Ah ok. I figured I could use stainless rivnuts but thought it might okay to use epoxy, then rivnut.

    Would that not be adequate?
    Probably but I like the extra security of some beef in the tube in case of accident damage from a crash.
    Bill Fernance
    Bicycle Shop Owner
    Part Time Framebuilder
    Bicycle Tragic

Similar Threads

  1. Best place to source scrap tubing to practice brazing
    By AnthonyLubetski in forum The Frame Forum@VSalon
    Replies: 5
    Last Post: 10-10-2015, 07:24 AM
  2. A Good Source for Straight Gauge Stainless Tubing?
    By ToddFarr in forum The Frame Forum@VSalon
    Replies: 5
    Last Post: 05-20-2013, 12:42 PM
  3. Source for carbon stops?
    By GSmith in forum The Frame Forum@VSalon
    Replies: 2
    Last Post: 08-11-2010, 03:02 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •