User Tag List

Results 1 to 19 of 19

Thread: Nakiri (Japanese Vegetable Knife)

  1. #1
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Nakiri (Japanese Vegetable Knife)

    During the latter part of my year or so with a seriously sharp Masakane gyuto (Japanese style chef) knife the rationale behind the Japanese nakiri gradually became apparent.

    Certainly I could finish out my tenure on Earth with only my chef knife but having transitioned to nearly vegan, and chopping lots and lots of veg, the long length and razor sharp tip of the chef has become....a bit of a hindrance and safety concern; so I splashed out on this: https://bernalcutlery.com/collection...36251612872856

    The Masakane is SK steel. I'm not a fan of the small handle of this particular knife but the simple, pretty thin mono-steel, SK blade takes and holds a razor edge fabulously. It doesn't have the pedigree of the hand forged knives made of Hitachi "white" and "blue" steels sandwiched between softer steels but it does the job in outstanding fashion.

    The Kaji-bei nakiri is iron clad white steel (Shirogami 2). The shorter length and blunt end will be very nice, easier and less dangerous to use for mass veg chopping. Obviously it will take and hold and serious edge. I considered waiting for a blue steel (Aogami 1 or 2) version to be restocked since it's supposed to give up a gnat's ass of sharpness for a bit more resistance to wear; but up in the knife steel stratosphere occupied by all of these steels I decided that for me there couldn't be a difference that made a difference.

    It's on the way; user report later, but I can tell you that the thought of being able to whack lots of veg without having to be so extremely mindful of length and sharp tip is reassuring.
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  2. #2
    Join Date
    May 2016
    Posts
    42
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    I have this guy:

    https://www.korin.com/HKR-TDNA-165_2...%253Aj1o3hyj90

    I bought a much cheaper Nakiri and immediately loved the shape, but it didn't do a great job of holding an edge (was a like $50 Tojiro). It has mostly become my go to knife, even for some light protein work. Obviously the Gyuto is better if I'm butchering something, but the Nakiri is so easy to use. Enjoy!! It's also really quick to sharpen without a taper.

  3. #3
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Quote Originally Posted by jdanton View Post
    I have this guy:

    https://www.korin.com/HKR-TDNA-165_2...%253Aj1o3hyj90

    I bought a much cheaper Nakiri and immediately loved the shape, but it didn't do a great job of holding an edge (was a like $50 Tojiro). It has mostly become my go to knife, even for some light protein work. Obviously the Gyuto is better if I'm butchering something, but the Nakiri is so easy to use. Enjoy!! It's also really quick to sharpen without a taper.
    The knife arrived this week, I've used it just a little bit but the shape and size are much better for chopping veg.; the risk of poking or cutting myself is vastly reduced and it's just easier to use for that. As noted earlier, I could finish my tenure on Earth with the Chef (+ bread + paring) so this is a bit of a First World indulgence but I have to say that it's far nicer to use for most of what I do than the Chef is.

    It's funny; all of us live our own personal prototype; and prototypes are never the end stage of evolution, personal or otherwise. So, as an "if I knew then what I know now" sort of comment, which can be applied to everything....but here concerning kitchen knives....a chef, nakiri, bread, paring, long-skinny slicing knife and maybe a cleaver, but that'd be it. No mas. I am increasingly moving into the less is more lane.
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  4. #4
    Join Date
    May 2016
    Posts
    213
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Cool! I hope you get along really well with it.

    I've only tried one nakiri (Masakage Shimo), but I knew straight away that knife was not for me and moved it along. I didn't like that particular knife, but it was also useful in helping me realize that a standard nakiri is not a knife that is natural or ideal for me. Like you, or anyone else, I could get by just fine with a knife or two but I do enjoy using different knives. While I mainly use carbon steel knives these days I really love my stainless CCK 1812 when I've got to mow through a bunch of veg prep. It's very laser-ish and the overall size is so great for scooping and moving product from the board elsewhere.

    I also really like a longer and flatter bunka for veg prep (and overall general purpose stuff).

  5. #5
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    After a couple of weeks I can say I'm glad I got the Nakri. I'd been aware of blunt nose Japanese kitchen knives but had never used one until not too many months ago when I used one while visiting an old friend. If curious and you get the same sort of opportunity to try one out, give it a whirl; I made dinner that night after sharpening Robert's gaggle of dull knives. His shorter, smaller Henckels Western version was a pleasure to use and got me interested.

    The one I got and most of the ones I see advertised are 165mm but I also see a few longer and some 135mm examples. I might go for 135mm (certainly not longer) if I were to do it over again; there doesn't need to be much push or pull of the edge and the shorter version would be more easily maneuvered. The one at my friend's place was in the 135mm range and it's daintier size was kinda nice. Not sure, and not a big deal, but something to be aware of and consider particularly if you can test drive different lengths.
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  6. #6
    Join Date
    Jun 2012
    Location
    Seattle
    Posts
    922
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    I haven't tried a nikiri shape. Generally I like gyutos that are a little bit flatter and a nikiri goes to the obvious logical the extreme of this concept. I might have to try one just to see but so far I've thought that it would be too flat. Your thoughts?

    I haven't been too concerned about poking myself with the point of a gyuto. Like most of us I have cut myself before, and one of the side effects of great knives is the focus that comes from holding a 10 inch razor blade and knowing what it can do.

  7. #7
    Join Date
    Nov 2011
    Location
    Denver, CO
    Posts
    459
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    I adore all of my nakiri's and I always highly recommend Takeda.
    https://carbonknifeco.com/collections/takada-no-hamono
    The best knives, unbelievably sharp and super easy to keep sharp, and just gorgeous. Well worth the investments.

  8. #8
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Quote Originally Posted by 9tubes View Post
    I haven't tried a nikiri shape. Generally I like gyutos that are a little bit flatter and a nikiri goes to the obvious logical the extreme of this concept. I might have to try one just to see but so far I've thought that it would be too flat. Your thoughts?

    I haven't been too concerned about poking myself with the point of a gyuto. Like most of us I have cut myself before, and one of the side effects of great knives is the focus that comes from holding a 10 inch razor blade and knowing what it can do.
    The nakiri isn't flat, as in a straight line between two points; it has a very gentle curve that appears uniform until near the blunt end where the radius of curvature starts to decrease. I guess that a tiny bit rocking motion just sort of happens; it's not too shallow a curve for me; I quite like it. My guyto is MOL as sharp but I prefer the nakiri for nearly everything I do; well, everything of late. I'm very close to zero meat, poultry, whatever; eggs and a little bit of fish, yes.
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  9. #9
    Join Date
    Apr 2011
    Location
    Hillsdale NY
    Posts
    26,254
    Post Thanks / Like
    Mentioned
    75 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    If you want to screw around with the shape of a Nakiri without a $500 investment, I can heartily recommend the Kyocera ceramics. They aren't totally cheap (for that, go with a PureKomachi you can easily make crazy sharp) but they are great to cut with, especially on vegetables.
    Jorn Ake
    poet

    Flickr
    Books

  10. #10
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Quote Originally Posted by j44ke View Post
    If you want to screw around with the shape of a Nakiri without a $500 investment, I can heartily recommend the Kyocera ceramics. They aren't totally cheap (for that, go with a PureKomachi you can easily make crazy sharp) but they are great to cut with, especially on vegetables.
    My iron clad laminated shirogami 2 steel was $74 and the SK mono-steel gyuto about the same; one does not need to spend hundreds of $ to get seriously sharp/good kitchen knives. Bernal has a modestly high carbon steel nakiri for $55 and I expect that a decent high carbon steel example can be found for even less at an Asian housewares store.

    This link is to info on Hitachi shirogami 2 but the site has information on lots of relevant steels. Mine came quite sharp but not polished; I think it would benefit from that but I haven't gotten around to it. These things are very seriously sharp even when not as sharp as they can be.

    All that said....while I'm glad to have these two it really is kind of funny; I needed to cut a peach the other day so I used my old, stainless Lamson 650 chef; didn't want to risk chipping a fancy steel edge on a peach pit. I don't keep it as sharp as it could be but it got the job done just fine. There's something to be said for rough'n tumble tools that don't need to be babied.

    I don't know much about ceramics but it sounds like chipping can be a problem in more ways than one.
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  11. #11
    Join Date
    Apr 2011
    Location
    Hillsdale NY
    Posts
    26,254
    Post Thanks / Like
    Mentioned
    75 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    We've had a ceramic knife for over 10 years and no problems with regular use. They discolor a bit with some foods, so I suspect that's why they now have the black color option.
    Jorn Ake
    poet

    Flickr
    Books

  12. #12
    Join Date
    Apr 2014
    Location
    Manhattan NY
    Posts
    1,637
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    I have a Wustoff 8 inch knife I use for everything. Why is the Nakiri better for vegetables? -Mike G

  13. #13
    Join Date
    Jul 2010
    Location
    Greenville SC
    Posts
    932
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Thx Jorn just popped for one of those $35 specials. Will report on its functionality. And I could probably do with one knife as well, I just like taking care of, and sharpening those things. And, my romance with German steel is over after having a few Japanese knives.
    Tim C

  14. #14
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Quote Originally Posted by fastupslowdown View Post
    I have a Wustoff 8 inch knife I use for everything. Why is the Nakiri better for vegetables? -Mike G
    For me: I hold some items by thumb and forefinger, and then slip the tip of the knife underneath the web of my hand, say when quartering a small, red potato or similr. The pointy end of a chef can poke me if I miss; the blunt end of the nakiri won't. I also like indexing (or almost) the broad rectangle of the nakiri off of my forefinger when holding veg in a more conventional manner; I find the compact length to be convenient and easy to handle as well.

    I view this as extravagant, for me anyway, but I do feel a bit more confident that I won't pierce myself with the nakiri; but as earlier, I could easily finish life with a decent stainless chef.

    Folks who are far more sophisticated than I at cutting things probably have other reasons.
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  15. #15
    Join Date
    Apr 2011
    Location
    Hillsdale NY
    Posts
    26,254
    Post Thanks / Like
    Mentioned
    75 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    I like the stability of the cut. The broad flat ended blade cuts and stays straighter more easily in something that is a bit of a tough cut. Carrots for example. Or a kabocha squash. And chopping stuff too. Whack whack whack. Think of it as a cleaver for vegetables.
    Jorn Ake
    poet

    Flickr
    Books

  16. #16
    Join Date
    May 2016
    Posts
    213
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Quote Originally Posted by COVRTDESIGN View Post
    I adore all of my nakiri's and I always highly recommend Takeda.
    https://carbonknifeco.com/collections/takada-no-hamono
    The best knives, unbelievably sharp and super easy to keep sharp, and just gorgeous. Well worth the investments.
    You wrote Takeda, but linked Takada. I suspect you are recommending the latter.

  17. #17
    Join Date
    Nov 2011
    Location
    Denver, CO
    Posts
    459
    Post Thanks / Like
    Mentioned
    4 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Quote Originally Posted by ColonelJLloyd View Post
    You wrote Takeda, but linked Takada. I suspect you are recommending the latter.
    That is correct. One day we will get an edit button on here. ha.

    Any knife maker on that site is amazing. Plus Carbon Knife is run by some good friends here in Denver!

  18. #18
    Join Date
    Apr 2010
    Location
    Tallahassee, FL
    Posts
    1,924
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    Knife Sharpening

    What do you folks use for magnification and inspection of your work? I use a pair of 3 or 4x reading glasses over my bifocals. That goes into the “plus” column but I’d like something quite a bit more powerful, maybe with a light.

    Folks are all over the place on the knife forums; I’m not interested in gratuitous magnification but I’d like enough be able to tell if I’ve achieved my goal of a proper apex (rather than a truncated one) after each grit, before going to the next. One guy mentioned his aversion to holding the knife as close to his eyes as a loup would require; I never thought of that (assume I’d still be wearing my glasses) and it made me wonder about magnifying devices that sit on a table, over the knife.

    I also saw some nifty bevel gauges. I don’t think I want one that’s intended to be used as a crutch on the stone, but one that I can slip over the blade, at various points, and see if I’m in the ballpark with my bevel angles.

    Any suggestions?

    My waterstones are 1000, 4000, 8000. I often ignore the 8000 but largely bc a good 1000 or 4000 finish is better than wrecking it with a third at-bat on the 8k; it just depends on how lucky I feel. I need to get a rough stone to make chip removal and re-profiling quicker; something in the 300, 400 range I think? And a 2000 seems maybe a useful addition to speed things along. I flatten them with wet/dry paper on my bicycle building surface plate. I’m not super-duper at this but I manage to get there...sometimes reasonably quickly, sometimes it’s a long journey; but being able to see the edge under magnification a lot better than I can now, and do quick evaluations of the bevel angle, will have to be helpful
    John Clay
    Tallahassee, FL
    My Framebuilding: https://www.flickr.com/photos/21624415@N04/sets

  19. #19
    Join Date
    May 2016
    Posts
    213
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Nakri (Veg Knife)

    I have a jeweler's loupe that came with a 7-8 piece sharpening kit from CKTG. For me, I agree that there could be better options.

    I will say that I've found a little felt block super useful for removing burrs. And a good leather strop (larger is better) has been a revelation. I have a 3x11 steel plate with a couple kangaroo leather strops with magnetic backs. There are much cheaper solutions for sure and even a flat block of wood, newspapers, denim, etc can be useful.

    I started with a 140 diamond plate (for flattening and haven't needed to repair knives yet), 1000 Arashiyama, and 6000 Arashiyama. I wanted something in between and the Shapton Glass 2000 was recommended. Some knives I stop at 2000. Again, finishing a knife on a strop or stropping to realign the edge (as opposed to a honing rod) is immensely satisfying.

    Cerax makes a 280/1500 combo stone which might be useful to you. I swear I thought they made a 340/2000-2500 combo too but I'm not seeing it. ~400 grit stones seem to be popular. Apparently in those medium grits like 2000-3000 different stones cut much different than you would expect from the grit number so it's helpful to ask folks who have used them.

Similar Threads

  1. what vegetable dish would you add to this meal?
    By znfdl in forum Cooks - Epicureans - Toque-istas
    Replies: 17
    Last Post: 04-14-2017, 12:02 PM
  2. Japanese Knife Technique
    By spopepro in forum Cooks - Epicureans - Toque-istas
    Replies: 59
    Last Post: 01-05-2014, 09:28 AM
  3. Anyone out there using Textured Vegetable Protein?
    By Mabouya in forum Cooks - Epicureans - Toque-istas
    Replies: 16
    Last Post: 07-19-2013, 10:22 PM
  4. Japanese eggplants
    By steve garro in forum Cooks - Epicureans - Toque-istas
    Replies: 18
    Last Post: 10-06-2012, 05:16 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •