AeroPress vs Pour Over

[froze]

Today I was a bit bored! so, I decided on experimenting a bit.

I knew that the coffee made the Turkish way, and by using a Moka pot were both very distinct in flavor from not only each other but any other method, but I couldn't find that distinction by memory between the AeroPress and a Pour Over, so I did something not in my usual way of making coffee.

I usually I don't measure anything when I make coffee, I like to have flavors change on me due to inaccurate measurements, but this time I decided to measure right down to the gram of coffee being used with equal amounts being used in each maker, using the same coffee, I also used the exact same amount of water, and I used the grinds recommended for each type, fine for the AeroPress and medium fine for the Pour Over, heated up the water one cup of water than divided the cup into 1/2 cups just to see if there was a taste difference. I use my AeroPress like a French Press, I stir the coffee gently like the AeroPress and the French Press instructions say to do, but then I let it set for 4 minutes like French Press has to, which was about as long as it took me to slowly pour the hot water over the coffee in the Pour Over maker. What I discovered was interesting, or at least I think it's interesting! LOL!!

The one thing to note is that the Pour Over was slightly cooler when it came time to taste them, so I heated it back up for about 10 seconds in the microwave which came out real close to the temp of the AeroPress just to make sure I wouldn't get a temp variance where I might prefer one over the other.

So, what happened you scream? I could not distinguish any difference between the two!

Maybe some of you that have those two methods can try this experiment with those two coffee makers and tell us what you think. But as far as I'm concern there was no difference, or if there was it was so minute, I couldn't taste it with my 68-year-old taste buds. I will probably retire the AeroPress since my Pour Over looks a bit nicer on the countertop.

Let the taste testing begin.

[Too Tall]

"Pour Over looks a bit nicer on the countertop."

Looks matter. I'll stop there.

FWIIW How you treat each method, whatever that is, really matters. Making a really freakin' good cup of coffee does take a bit of rocket science. Also, we know this for fact, you can make incredible coffee with the dumbest methods it only takes some skill and consistency.

One of my favorite "wow" coffee drinks is a ridiculously simple "Flair" espresso press. I got that thing when they first came out and faff'd about thinking it was not great. All it took was a good grind, measured doses and a bit of thermodynamic management and holy cow what a great shot.

I like your approach.

[johnnyace]

We have a Moka pot, a Chemex, and a French press, in conjunction with a Capresso burr grinder. Most days I go with the French press, but lately I've been using the Chemex more. The Moka pot sees less use, probably because it is aluminum. Although I'm now hearing that the link between aluminum and Alzheimer's may be unfounded.

Hmm, I may have to break out all three soon, and do a side-by-side taste-test comparison. And then maybe go split a whole lot of wood, haha.

[zetroc]

I'm with you, I have a hard time telling an Aeropress cup from a pourover, at least when it's me making it. Both methods make a great cup of coffee.

[holliscx]

I was in happy land with a V60 as my daily driver until EF cycling's marketing and communication's director (Matthew Beaudin) shouted how superior the Kalita Wave is on one of my instagram posts. His comment was left field so I took a flyer and ordered the Kalita Wave. I told him I was pouring mind blowing cups of coffee with my V60 but now I'm in pour over heaven with the Kalita Wave. What's best is choosing between the two, but I'm baffled how each brewer produces remarkably different results.

[JoB]

Interesting. do you use the Kalita filters?

I was in happy land with a V60 as my daily driver until EF cycling's marketing and communication's director (Matthew Beaudin) shouted how superior the Kalita Wave is on one of my instagram posts. His comment was left field so I took a flyer and ordered the Kalita Wave. I told him I was pouring mind blowing cups of coffee with my V60 but now I'm in pour over heaven with the Kalita Wave. What's best is choosing between the two, but I'm baffled how each brewer produces remarkably different results.

[froze]

I was in happy land with a V60 as my daily driver until EF cycling's marketing and communication's director (Matthew Beaudin) shouted how superior the Kalita Wave is on one of my instagram posts. His comment was left field so I took a flyer and ordered the Kalita Wave. I told him I was pouring mind blowing cups of coffee with my V60 but now I'm in pour over heaven with the Kalita Wave. What's best is choosing between the two, but I'm baffled how each brewer produces remarkably different results.

https://sipcoffeehouse.com/hario-v60...n%20your%20cup.

[froze]

We have a Moka pot, a Chemex, and a French press, in conjunction with a Capresso burr grinder. Most days I go with the French press, but lately I've been using the Chemex more. The Moka pot sees less use, probably because it is aluminum. Although I'm now hearing that the link between aluminum and Alzheimer's may be unfounded.

Hmm, I may have to break out all three soon, and do a side-by-side taste-test comparison. And then maybe go split a whole lot of wood, haha.

I have an AL Moka pot myself, the problem with these AL ones is that the coffee acid eventually eats the coating they put on the AL then the AL will breakdown into the coffee, not sure if that's a problem but I don't want AL in my coffee or food, so I now have a stainless steel Moka pot, it cleans up a lot nicer too than the AL ones. The stainless steel ones are bit more expensive but the one I got only cost me $39 and it got high reviews on Amazon.

[johnnyace]

I have an AL Moka pot myself, the problem with these AL ones is that the coffee acid eventually eats the coating they put on the AL then the AL will breakdown into the coffee, not sure if that's a problem but I don't want AL in my coffee or food, so I now have a stainless steel Moka pot, it cleans up a lot nicer too than the AL ones. The stainless steel ones are bit more expensive but the one I got only cost me $39 and it got high reviews on Amazon.

Yeah, that's definitely a concern for me. Which stainless steel Moka pot do you have? I have my eye on the bonVIVO Intenca Stovetop Espresso Maker. Seems to have good reviews.

[robin3mj]

My wife and I were purely old school coffee makers forever: multiple Bodum French press sizes, ceramic pour over, small Moka pot. But with three kids, she sprang for a Moccamaster during Covid and we haven’t looked back.
It gets used first thing in the morning seven days a week and on the two or three days a week I want something else afterwards I use the pour over or Moka.

If I had all the time in the world each morning and only had to make a cup for myself it’d be: Pour over, Moka, Moccamaster, French press.

[froze]

Like I said, I read a bunch of reviews before settling on this one, but the one I got was the LuxHaus 3 cup Moka Pot, it's still on Amazon for $39, they do make a 6 cup version if you want more capacity, my wife doesn't like coffee so it's just me drinking it so 3 cups are fine for me. I've had this Moka Pot for 3 or 4 months and it works as good as the old AL one did. You can get better Stainless Steel Moka Pots that run into the low $100's but they all do the same thing and make the coffee the same way, I don't see the point in a more expensive one unless you have a designer kitchen you're trying to impress with a fancier coffee maker like the Kamira, but of course you could always put the Moka pot in a cupboard. By the way, the $100 Kamira got slightly lower reviews than the LuxHaus did on Amazon. The Luxhaus has a 100% guarantee against rust for life, but I don't put much stock in warranties.

[jscottyk]

I usually I don't measure anything when I make coffee, I like to have flavors change on me due to inaccurate measurements, but this time I decided to measure right down to the gram of coffee being used with equal amounts being used in each maker, using the same coffee, I also used the exact same amount of water, and I used the grinds recommended for each type, fine for the AeroPress and medium fine for the Pour Over, heated up the water one cup of water than divided the cup into 1/2 cups just to see if there was a taste difference. I use my AeroPress like a French Press, I stir the coffee gently like the AeroPress and the French Press instructions say to do, but then I let it set for 4 minutes like French Press has to, which was about as long as it took me to slowly pour the hot water over the coffee in the Pour Over maker. What I discovered was interesting, or at least I think it's interesting! LOL!!

The one thing to note is that the Pour Over was slightly cooler when it came time to taste them, so I heated it back up for about 10 seconds in the microwave which came out real close to the temp of the AeroPress just to make sure I wouldn't get a temp variance where I might prefer one over the other.

In my experience, a 4 min steep time is too long for an AeroPress; the pressure that is part of the extraction lowers the time required vs infusion techniques like French Press. And also different compared to a drip technique like pour-over. I'm not saying I can tell the difference in a blind taste test, but if one wants to compare the techniques it would be best to use the optimal technique (including dwell time) for each method.

If you want to fully geek out on this stuff, James Hoffman's videos are highly recommended. Three of my favs are...

[froze]

I watched the Hoffman video for the AeroPress I don't get bitter coffee the way I do it either, I treat it like a French Press, and I get good results, but I will try it like Hoffman did and see what happens. Problem is with videos on how to make coffee, in this case with the AeroPress, there are 100's of these videos and each have their own way, so it really boils down to what method you think tastes the best, you may like Hoffman's method but someone else may not. Keep in mind that people like Hoffman are making money on their videos, so it behooves them to be different to get viewers and subscribers. I've played, as Hoffman suggests doing, with several different ways to use it and I settled in on the treating it like a French Press, including the grind. BUT, the French Press makes a stronger flavored cup of coffee, not sure why, some say it's due to the filter the AeroPress uses is removing the oil, continue reading below.

I'll also have to try that method of pour over he does too.
I did find another use for the AeroPress, I also like to make Turkish coffee, but that method leaves a lot of grinds and sentiment in the coffee, so I pour the finished Turkish coffee into the AeroPress than press it through so the filter takes out all the particles. In the above paragraph I said that the French Press coffee has a stronger taste than the AeroPress does, and that could be due to the filter taking out the oil, problem is, when I filter my Turkish coffee I don't notice a weaker taste, so I don't think the filter is changing the taste towards the weaker side.