User Tag List

Likes Likes:  0
Results 1 to 4 of 4

Thread: Hacking a SRAM Force 1x Crankset for Rohloff Chainline

  1. #1
    Join Date
    Apr 2020
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Hacking a SRAM Force 1x Crankset for Rohloff Chainline

    Hey all!

    New to the forum, looking for answers.

    I'm finishing up a stainless steel Rohloff build with a standard 68mm BSA bottom bracket.

    I have a SRAM Force 1x BB30 crankset that I'm hoping to integrate into the finished build.

    Any sense of how I might go about extending the chainlink to Rohloff's requisite 54mm?

    Thanks!

  2. #2
    Join Date
    Apr 2020
    Posts
    2
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Hacking a SRAM Force 1x Crankset for Rohloff Chainline

    One consideration: I'm open to swapping the SRAM spindle with a Cinch spindle, as per these instructions: https://forums.mtbr.com/fat-bikes/xx...le-922785.html

  3. #3
    Join Date
    May 2008
    Location
    Better to be ruined than to be silent atmo.
    Posts
    22,128
    Post Thanks / Like
    Mentioned
    24 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Hacking a SRAM Force 1x Crankset for Rohloff Chainline


  4. #4
    Join Date
    Jun 2008
    Location
    Philadelphia,PA
    Posts
    1,505
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Hacking a SRAM Force 1x Crankset for Rohloff Chainline

    Drew Guldalian
    Engin Cycles
    www.engincycles.com

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •