User Tag List

Results 1 to 13 of 13

Thread: Need some hand tools (mostly wrenches)

  1. #1
    Join Date
    Jun 2008
    Location
    USA
    Posts
    3,663
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Need some hand tools (mostly wrenches)

    About 25 years ago I bought a large Craftsman set of SAE and Metric wrenches and sockets. Over time I've lost some wrenches, and as I was working on the Alfa on Saturday (changing the clutch master and slave cylinders) I realized that I need to replace the lost tools and widen my range of small metric combination wrenches. I'm also missing a few sockets here and there.

    The question is whether I should stick with Craftsman or go with another brand. (Wikipedia says that the small Craftsman stuff I would need are now made overseas, mostly China).

    I'm thinking that for the ones and twos requires to fill gaps for those I've lost I'll stick with Craftsman (I'm not totally anal, but it would be nice to see matching stuff in the toolbox drawer. Seeing a mishmash of stuff won't make me quite as happy.)

    But for the sets of say, 9 combination wrenches in very small metric sizes, I'll get something generic. (read: Made in China)

    However, if anyone can recommend a reasonably priced Made in USA (or other non-sweatshop location) I'll consider that.

    Any ideas?

    Thanks

  2. #2
    Join Date
    May 2008
    Location
    DC
    Posts
    30,293
    Post Thanks / Like
    Mentioned
    59 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    If you want to match your Craftsman it's pretty easy to find good used stuff on Ebay, I've had good luck.
    Matco is not bad for inexpensive and easy to get.

  3. #3
    Join Date
    Aug 2011
    Posts
    1,946
    Post Thanks / Like
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    This has nothing to do with wrenches, but I love Estwing tools so very much. hecho in the usofa. I have a sportsman's axe that has been to heck and back a few times. I also got an Estwing Deadhead (thanks, dear!) and after hundreds of strikes on patio pavers & retaining wall bricks this spring it still looks new.

  4. #4
    Join Date
    Dec 2009
    Location
    BendOR
    Posts
    2,183
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    After wanting a set of nice box end wrenches for years I ponied up earlier this summer to the tune of ~$450. Every time I grab one I realise it was money well spent. Gear Wrench does really good mostly Taiwan made tools. Proto is worth looking at as well. There use to be a tool source sticky in the tech section as well, not sure who/why it was taken down. Craftsmen is living off the name they built 25 years ago and is dying on the vine along with sears.

  5. #5
    Join Date
    Dec 2010
    Location
    algood, tennessee, USA
    Posts
    1,745
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    American made and not pricey, also decent quality is Allen. I have several of their wrench sets and wratchet combos as well. I put them in my travel stuff cause they aren't super expensive. I rate them as better than good, and superior to Craftsman.
    ‘The Earth is not dying, it is being killed, and those that are killing it have names and addresses-‘ Utah Phillips

  6. #6
    Join Date
    Dec 2010
    Location
    algood, tennessee, USA
    Posts
    1,745
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    Also US made is Channellock for pliers and good screw drivers and Klein who makes pretty good everything..

    Mostly just brainstorming for my own info. Craftsman has gone to shit, and the warranty isn't what it used to be.
    ‘The Earth is not dying, it is being killed, and those that are killing it have names and addresses-‘ Utah Phillips

  7. #7
    Join Date
    Mar 2010
    Location
    NJ
    Posts
    2,656
    Post Thanks / Like
    Mentioned
    17 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    craftsman sockets have taken a nose dive in quality recently. they no longer say "USA" on them.

    offshore production is not necessarily an indicator of downward quality, but in this case - it is. hold and old USA socket in hand next to a brand new one and the difference in quality is easily seen.

    sad.

  8. #8
    Join Date
    Apr 2012
    Location
    Raleigh, NC
    Posts
    37
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    If you can find a Sears outlet (if they even exist anymore) you may be able to score an old stock set of US-made Professional combo wrenches for dirt cheap. They are chrome, great finish/quality and the shape fits great in the hand. Only caveat is they are no longer made in the US so you're stuck with China warranty replacement until the whole brand goes belly up.

    I'm a wrench snob and have Metric/SAE combo sets of the Craftsman pros with Bonney, Matco, Snap-on, Plomb filling in as extras/oddballs and specialty sets.

    Check out Garage Journal if you have some time to kill. Great place for any type of tool related information, especially if country-of-origin is a concern.
    Andy Belcher

    Cardinal Creative
    flickr

  9. #9
    Join Date
    Nov 2011
    Location
    Ottawa
    Posts
    1,053
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    Got to be new? I have had good luck purchasing used Snap On tools on the 'bay. Some of the newish Snap On ratchets are not made in the US but most sellers highlight AOC in the ad.
    Jonathan Lee
    My science page

  10. #10
    Join Date
    Mar 2009
    Posts
    1,275
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    i wouldn't buy anything cheaper than Craftsman, i think their wrenches and sockets are ok. their ratchets are fkcn terrible now.
    look for some nice ratchets with small heads and fine gearing. so worth it. anyone know of something besides snapon matco cornwell...???

    for pliers. just get some Knipex, cobra or something like that.

  11. #11
    Join Date
    Mar 2009
    Location
    Colorado
    Posts
    4,684
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    Y'all are gonna make fun of me... But I have had this set of Metrinch tools for 20 years and are the first thing I reach for when I need a socket or wrench.

    62 Piece Combination Wrench & Socket Set - Metrinch - Combination Sets

    -Joe

  12. #12
    Join Date
    Dec 2010
    Location
    algood, tennessee, USA
    Posts
    1,745
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    Yo Joe, not gonna laugh, run whatcha brung.. Never heard of them, but when something feels good, you just do it.

    I have some off brand stubby ratchet that is awesome, if it actually had a handle on it, it would be perfect. I look for reasons to use it.

    Quote Originally Posted by xjoex View Post
    Y'all are gonna make fun of me... But I have had this set of Metrinch tools for 20 years and are the first thing I reach for when I need a socket or wrench.

    62 Piece Combination Wrench & Socket Set - Metrinch - Combination Sets

    -Joe
    ‘The Earth is not dying, it is being killed, and those that are killing it have names and addresses-‘ Utah Phillips

  13. #13
    Join Date
    Mar 2013
    Location
    Boston
    Posts
    2,363
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Need some hand tools (mostly wrenches)

    If you live in MA...

    Hand tools, power tools, shop tools - Worcester, Massachusetts

    Craigslist, too.

    For the Alfa, I'd hunt for some old USAG bits. I also like Beta Utensili for pliers, etc.

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •