Did you receive those specs directly from The Welders Warehouse?
I ask because recently I communicated with Graham Rhoades (Founding Partner / Technical Advisor) of The Welders Warehouse, and he was kind enough to relay the following specs("full data from the factory") ;
'The Welders Warehouse Multi-Jet Oxygen + Propane Nozzles'
"Nozzle Thread is ¼” x 36TPI UNF
Diameter of centre Flame Jet Holes are:
No1 = 0.7mm
No3 = 0.9mm
No5 = 1.1mm
No7 = 1.4mm"
...
"They’re made in Taiwan"
'Just hoping to prevent anyone(including myself) potentially damaging their (Smith AT61 ¼” x 32TPI) elbows and tips.
Also, what do you think of the tips currently (pros & cons etc.)?
Thanks in advance,
Jihoon
Bookmarks