FS: Frame Building Tools and Tubing / Garage Cleaning Sale

[Jacob_Curtis]

Cleaning out the garage.

IMG_0811.jpg
80/20 fork jig, Yes it's primitive, but I've built a half dozen forks with it. $40 plus shipping
IMG_0807.jpg
Braze ons, Drop Outs, Stainless Lugs, Practice Lugs, Binder Bosses, and more $50 for the entire lot
IMG_0808.jpg
IMG_0809.jpg
Practice tubing, headtube stock, raw stock for making lugs, a pile of rack tubing that bends nicely in benders listed below, partial tubesets (a couple sets of seatstays, chainstays, forkblades, a few other butted tubes, and even a few aero scraps. $100 for the lot plus shipping.
IMG_0801.jpg
Imitation 51IS disc tab mounting jig, fits anvil dummy axle $10 plus shipping.
IMG_0800.jpg
Fork blade bending mandrel, capable of creating two different radius bends depending on placement of clamp $50 plus shipping
IMG_0799.jpg
About 40pcs of Weldmold 880-T .045 $15 plus shipping
IMG_0798.jpg
Tubing benders for 1/2" 5/8" and 1/4" tubing, 5/8" bender has been modified for use in vise. $60 for all three plus shipping
IMG_0797.jpg
Alvin Compasses for drafting, small and large for drawing wheels at 1:1 scale. $15 plus shipping
IMG_0795.jpg
Paragon Tubing Blocks 1 1/4" has been trimmed slightly. All 5 for $40 plus shipping
IMG_0796.jpg
Set of wooden tubing blocks, 3 way tube block with curved clamping surface for clamping tapered tubes. All for $35 plus shipping
IMG_0805.jpg
Qty:6 English BB Shells Cr-Mo 70mm width. $20 plus shipping
IMG_0804.jpg
IMG_0803.jpg
Tubing thickness gauge with Mitutoyo Dial Indicator (includes two tips, flat and pointed) $100 plus shipping
IMG_0802.jpg
Paragon hole saw arbors FT2011 and FT2012, plus assorted Starrett and morse hole saws $15 plus shipping
IMG_0810.jpg
Tubeset Nova CrMo Dropouts Stainless Der Tab $50 plus shipping

OR Take it ALL for $500 plus shipping!

Willing to combine for shipping, more than willing to offer local pickup to anyone in Atlanta Area
Please contact me via email at curtisjacobr@gmail.com with questions, I don't check my PM's on here very often.
I will edit as things sell, so unless noted it's still for sale.

[David Tollefson]

email sent!

[Allan Varcoe]

Email sent too. :)

[Jacob_Curtis]

Tubing blocks, both wood and paragon SOLD
Tubing thickness guage SOLD
Paragon Arbors / Holesaws SOLD
Lug/ Braze on lot SOLD
BB shells SOLD

[jgerhardt]

Do you mean 3/8 tubing bender?
I didn't think rigid made one of those above 1/2"

[Amaro Bikes]

If it's available overseas I would like the fork jig and weldmod rods

[Jacob_Curtis]

Fork Jig SOLD
Tubing Lot SOLD

jgerhardt, it is in fact a bender for 1/2" tubing, if you look closely at the image you can see it is stamped indicating half inch O.D. tubing
Amaro Bikes, unfortunately the fork jig is gone and I am only able to ship within the continental united states.

[zank]

Is the bending mandrel still available?

[Jacob_Curtis]

Alvin Compasses and Disc tab jig remain, all other bits are SOLD