Friday PicFest No.303

[Eric Estlund]

Buttoning down the old year-











Opening up the new-

[e-RICHIE]

[Craig Ryan]

[Mark Kelly]

Finally got the my filament winder up and running:

Winder_2

Video for those for whom this is unfamiliar technology:

https://flic.kr/p/qA4x61

[Nate Zukas]

Last one for 2014-MonsterCross

IMG_2635 by Nate Zukas, on FlickrIMG_2637 by Nate Zukas, on FlickrIMG_2640 by Nate Zukas, on FlickrIMG_2641 by Nate Zukas, on FlickrIMG_2645 by Nate Zukas, on FlickrIMG_2646 by Nate Zukas, on FlickrIMG_2652 by Nate Zukas, on Flickr

Thanks! NATE

[EnginCycles]

IMG_20150101_150953.jpg

Tom Palermo memorial ride. RIP buddy. I will miss you. This photo was 30 minutes before what seemed like thousands arrived.

[Crowemagnon]

image.jpg

Was very pleased to get my first two road frames completed as a capstone project, a final piece of learning for the year.

These twins were my first (and second?) attempts at PF30, cable guides, vertical dropouts, bottle bosses, short reach brakes, crank arm and chainring clearance ( and heel clearance to boot ) derailleur hangars and mounts, 44mm headtubes and wet paint, not to mention a first attempt at reasoning with reckless painters, dent repairs, and spraycan paintwork.

All I intended was to explore some ideas about stock sizing!?!
I feel safe to say I've learnt a thing or two this time around.

Patrick Crowe Rishworth

[DeeDub76]

Happy New Year!

[devlin]

You guys have all seen this stuff before but here's my take on it so far........

1.jpg

2.jpg

3.jpg

4.jpg

5.jpg

6.jpg

7.jpg

8.jpg

9.jpg

10.jpg

11.jpg

12.jpg

13.jpg

14.jpg

15.jpg

16.jpg

17.jpg

18.jpg

19.jpg

20.jpg

21.jpg

22.jpg

23.jpg

24.jpg

25.jpg

26.jpg

27.jpg

[Curt Goodrich]

Measuring front center on the Marchetti jig.
IMG_3505 by curt_goodrich, on Flickr
IMG_3506 by curt_goodrich, on Flickr

Fork length + lower headset stack = bottom of the head tube on the Marchetti.
IMG_3596 by curt_goodrich, on Flickr
IMG_3597 by curt_goodrich, on Flickr

Measuring seat tube length on the Marchetti jig.
IMG_3598 by curt_goodrich, on Flickr
IMG_3599 by curt_goodrich, on Flickr

[fortyfour]

03082 Playlist :

Let's start off 2015 right :

South Bend Heavy 10 : And it's ALL mine as of 12:30pm, 1.2.2015...





Holiday R&R...

[Jaegher]

A frame-free contribution this time. Our new catalogue is ready and we are so proud of it we'd love to share it with you !

1960767_920361961315036_7724200841297378758_o.jpg10284912_920361624648403_2028010535689615643_o.jpg10320914_920361694648396_487385472753268113_o.jpg10492945_920361974648368_4328830914031934888_o.jpg10750251_920362001315032_8374858647620148849_o.jpg10835391_920362061315026_6390785692192762594_o.jpg10856678_920361871315045_5162838517304548024_o.jpg10866005_920361867981712_1070078479446232525_o.jpg10869641_920361894648376_3814128774406800017_o.jpg10872842_920361811315051_1325173398334883332_o.jpg10872989_920361591315073_3088708611568122351_o.jpg10873428_920361751315057_2204973345678999299_o.jpg10887157_920361761315056_9210371079818630770_o.jpg10900204_920361611315071_4724031984481056053_o.jpg

[Michael Gordon]

Primer just applied! Can't wait to post pics of the finished ride.

Primed.010215.jpg

NEXT... To be built with Richard's PegoRichie pipes, Rene Singer lugs, and a steel fork to match.

Richard Gordon.Road-1 Drawing.010315.jpg
Richard Gordon.Road-1 Specs.010315.jpg

Happy New Year!