The 360 Vise

[DeeDub76]

It is so nice to have a vise that you can have access to all sides. I didn't realize how much more convenient it is until I recently installed a pedestal vise in my shop. However, I sometimes have to share my workspace with vehicles. So I wanted to have mine removable. I could've opted for something with a heavy base, but I would have to man handle it out of the way when needed. So this is what I came up with:

After locating the optimal location I began with coring a 4" inch hole into the floor.



Using anchoring cement I installed a cast iron pipe coupling flush with the floor. When not in use the hole is plugged with a brass pipe plug.



To install the vise, just thread in the pedestal and get to work.

[Too Tall]

Slick. How do you keep it from swiveling in the pipe?

[DeeDub76]

Screwing the pedastal pipe in by hand creates a pretty good fit, but I use the Park vise to gain added leverage. Doing this tightens the connection really well. It is surprisingly stout.

[steve garro]

That's not a vise.

- Garro

[Clockwork]

That's not a vise.

Now that's a vise, mate.

[Too Tall]

Nice walnut cracker.

Now that's a vise, mate.