Dear Guest,
Please register or login. Content don't create itself!
Thank you
-
Al prep for repaint
Are you goes doing anything special to prep raw Aluminum before paint? My normal process for painting al.......bead blast, degrease, metal etching primer, paint.
I'm considering powder coating, but haven't made up my mind.
-
Re: Al prep for repaint
-
Re: Al prep for repaint
Sorry about the oversight.....need to change my username.
My name is jeff baringer, I'm a fabricator in the hudson valley
-
Re: Al prep for repaint
Jeff,
I'd avoid bead blasting for Aluminum, as the beads (glass or stainless) tend to create a soft/rounded profile to the substrate that does not encourage mechanical adhesion.
Using aluminum oxide in a finer grain will promote adhesion, reducing the need for etching primer.
I would suggest;
Liquid paint: fabricate - solvent wipe down - 120 grit media blast - blow off with dry compressed air - solvent bath - fume off in bake box - primer - colors - clear
For simple finishes (one/two color) and limited graphics, straight powder coat is difficult to beat on an AL frame as corrosion beneath the finish and substrate is less of an issue than with steel.
If you choose to go with a powder coat, consult your coater to see if he offers a wash and adhesion promoter cycle before entering the application booth. If not, you will need to prep the frame to insure the best possible result.
Hit us back here if you have more questions...
r
Similar Threads
-
By ToddFarr in forum The Frame Forum@VSalon
Replies: 14
Last Post: 02-14-2013, 06:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks