Dear Guest,
Please register or login. Content don't create itself!
Thank you
-
building a workshop building
hi all,
i'm at the point of trying to plan to build a workshop at the bottom of the garden,
i'm thinking that i should be able to get away with 16 x 20 feet in size,
all i will need to house in the future is a medium sized lathe (60" between centres max, but more likely 40") and maybe a bridgeport mill (probably a short bed one) a decent sized workbench (can get a fami one with the tool cabinets as legs) and probably some shelving, and a proper stand for the frame jig, would you go with a mobile stand ?
is this feasible for a workshop that size ? i may never end up with a mill, i reckon i can do most stuff with a lathe, not really much into milling dropouts etc up, would have them cnc'd locally if i needed
what do you guys do as far as wall coverings go ? i was planning to build largely from 6x2 and 3/4" ply for the structure, insulated with rockwool or fibreglass, all of which aren't particularly resistant to burning !
any suggestions or advice will be much appreciated
thanks
NBC
Similar Threads
-
By CyclesNoir in forum The Frame Forum@VSalon
Replies: 74
Last Post: 09-22-2015, 12:45 PM
-
By EricKeller in forum The Frame Forum@VSalon
Replies: 12
Last Post: 09-15-2011, 05:21 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks