matter of fact, i just sliced up an apple at my desk with the trusty old thing.
matter of fact, i just sliced up an apple at my desk with the trusty old thing.
I own a number of good knives, but if I am wearing anything other than dress pants, athletic shorts or spandex this is in my pocket. In the last 10+ years nothing has usurped its rule. It is utilitarian without being crappy, strong without being heavy and large enough without being particularly threatening. I have never found a knife I enjoy using more, or can more safely use one-handed.
Benchmade mini-griptilian
The Benchmade 530 features the same Axis lock (my favorite feature of the mini-grip) while being much slimmer and lighter...
Spyderco makes great blades, but I see them more like plastic-wonder-bikes than the Benchmades, which tend to sweat the details a little more. The Chris Reeve Sebenza that TT mentioned has to be vSalon approved...particularly if you are right handed.
I have a little Buck Stockman. I don't ask a whole lot of it since I mainly work in an office (I guess I've cleaned quite a few grouse and pheasant with it, and I cut a split radiator hose with it one), but it works just fine for what I need. Having three little blades is nice. The only drawback is that it doesn't lock.
I may pick up an Opinel or two to keep in my desk and glove box just because they look like nice little tools.
If I were using it for significant tasks on a daily basis and it wouldn't be frowned upon to have a clip sticking out of my pocket at work, I'd get a Benchmade.
Josh Simonds
www.nixfrixshun.com
www.facebook.com/NFSspeedshop
www.bicycle-coach.com
Vsalon Fromage De Tête
Seriously. He had a collection of knives and guns and cameras and watches and all sorts of good stuff. Taught me how to use them, care for them, and respect them. Long story, but I didn't end up with the guns or cameras or watches when we lost him a number of years back. But I have a box of knives I make sure to keep clean and oiled. For cutting stuff I just use my benchmade liner-lock.
Josh Simonds
www.nixfrixshun.com
www.facebook.com/NFSspeedshop
www.bicycle-coach.com
Vsalon Fromage De Tête
My old stockman has a leather punch instead of the drop-point blade. Also does not have wooden scales...but rather some hard and very durable sort of nylon. It's been a heckuva' good knife now for many years. I don't think I've ever missed the lock feature. Back when I got mine there were very few locking blades available that weren't pig-stickers...useless for anything except flashing around.
Going a bit OT here. Wanted to show the knife that is my favorite "Big Knife", if one needs such a thing..and they can come in handy when you only want/need to carry one single knife to cut, slice, chop, pry, etc... The Al Mar SERE "Operator" is 250 bucks well spent. Very useful size and blade design for just about everything except maybe skinning and caping...but it even works okay for that. I can't imagine ever needing a larger knife...maybe need more of a pure skinning knife if you were dressing out lots of big stuff. There is a reason why the old Puma White Hunters go for big bucks on the 'Bay. They were a perfect skinning knife.
The Operator was designed by the armed forces Survival, Evasion, Resistance, and Escape, (SERE) school as an all-purpose knife for rangers, downed aircrews, scouts, anyone needing a knife that could do lots of things. The design is simple and the thing is very well made. This is not a Kabar.
I carry a small 2-bladed Case pocketknife most days. I keep it sharp and use it often. Carbon steel blades, not stainless; they keep an edge well. The knife is nothing special, probably a mid-priced item when new? It belonged to my late father and is probably from the 1920-30s. I got it back in 1983 when he died and, though certainly showing signs of wear, it is still going strong. Between him and me, it has been used on countless fishing and backpacking trips, along with everyday use.
I also use a silver-sided Victorinox similar to the one shown by AngryScientist (but no file blade) and I like that one too. Like the Case, it is slim and rides comfortably in a pants pocket. The Victorinox gets taken on cycling tours since it has a bottle opener, screwdriver ends, etc. It has been on two PBP rides as well. Pretty handy if you lack regular tools during a ride.
Otherwise, they're just pocketknives. As Chancerider wrote, "don't over think it."
Bill B.
Santa Cruz by the Sea
For EDC Opinels can't be beat - weighs about a much as a smart phone and locks. The blade has a nice shape, wide for a little knife but not too much.
Perfect match with cheese and saucisson sec.. Or to cut your ham on rye.
"Old and standing in the way of progress"
Wow, that's quite a knife.
The utility knife I use for unglamorous tasks is pretty basic.
It's made by Camillus, although I'm not sure what model it is. I don't think it was expensive at all. I've had it for 15 years or so, and done things with it no knife should be used for - i.e. non-knife tasks. I haven't managed to break the tip off or bend the blade, and the soft steel takes an edge easily.
It's nothing compared to that Al Mar, but it's been good to me.
I have allot of knives.
This is my current favorite - it's fantastic.
Spyderco Navaja
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
this is my edc
M4 Series Hunting Knives | EDC Folding Knife | CRKT
the opening mech took some getting used to and sometimes i have to take it apart and clean it to keep it opening well
but thats a pretty quick procedure granted you have the little bity star drivers for the screws...
have some opinels
they are cheap and have a good edge but i wouldn't want to use them for much more than cutting some veggies or cheese or something
i prefer a clip for edc
I'm fortunate to call Peter Atwood a friend and his stuff is top notch. Get something if you can.
That said, I think that a Victorinox Swiss Army knife, e.g. a Tinker or Soldier, is impossible to beat for <$20.
Another option is to go to County.com and put together a little keychain EDC kit to match your needs -- tweezers, screwdrivers, pry bars. Small money.
CountyComm - What's New Cage: (4QK35) Preppers & EDC Gear
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Something something ride your best bike every day.
Bookmarks