Friday PicFest No.217

[Dave Anderson]

Hi Everyone,

Here are some photos of Charilie's ACB 4-Season's Stainless frameset. It's set up to run Paul Racer brakes and with clearances for 35+ tires and fenders, etc.

Thanks for taking a look!

Dave

[Curt Goodrich]

Molteni re-imagined.

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

Untitled by curt_goodrich, on Flickr

[Nate Zukas]

Nancy's road frame finished! Gulf racing colors


IMG_6847 by Nate Zukas, on Flickr

IMG_6845 by Nate Zukas, on Flickr

IMG_6844 by Nate Zukas, on Flickr

IMG_6836 by Nate Zukas, on Flickr

IMG_6833 by Nate Zukas, on Flickr

IMG_6831 by Nate Zukas, on Flickr

IMG_6830 by Nate Zukas, on Flickr

IMG_6828 by Nate Zukas, on Flickr

IMG_6821 by Nate Zukas, on Flickr

IMG_6816 by Nate Zukas, on Flickr

IMG_6810 by Nate Zukas, on Flickr

Thanks, NATE

[Clockwork]

[Craig Ryan]

[Tyler Evans]

@02125 this week:
____________________________________________________

Titanium Road :: Berger Hardware :













____________________________________________________

Titanium Road :: ISP :: EPS :: Pinoy :















____________________________________________________


____________________________________________________

...and this: XXX
____________________________________________________

Cheers!

[edoz]

Dirt road bike ready for bar tape.

wpid-20130429_1830581.jpg

wpid-20130429_1831131.jpg

wpid-20130429_1831051.jpg

[Kumo Cycles]

Many workshop hours this week trying to finish projects before I head on a little holiday

Schmidt SL integrated dynamo contact dropouts (sans insulator plate) these things are awesome!



Port on the right of the fork is a reinforced nipple for the exit of the internal cable run from the SL dropout



Really like these neat centre pull bosses, for Paul racer brakes



That's it for me for a while.

I'm off to Italy tonight!

[Jeff Buchanan]

650B Rando frame, ready for final finish work and paint. tracy-alighnment.JPGtracy-scl.JPGtracy-rv2.JPGtracy-rv.JPGtracy-htl.JPGtracy-bb.JPGtracy-scr.JPGtracy-frameset.jpg

[fortyfour]

44 Bikes "Saturday Morning Lights" Edition...

03082 Playlist :
29er SS w/ 1x10 Optionery : Mississippi Bound

[zank]

Blast from my past. This is bike 8-ish (1999) and it was in for a face lift. Back when all I knew about was a good 'ole road bike.


Nancy O by Zanconato Custom Cycles, on Flickr


Nancy O by Zanconato Custom Cycles, on Flickr


Nancy O by Zanconato Custom Cycles, on Flickr


Mark O by Zanconato Custom Cycles, on Flickr


Stephen S by Zanconato Custom Cycles, on Flickr


Wayne B by Zanconato Custom Cycles, on Flickr


Wayne B by Zanconato Custom Cycles, on Flickr


Wayne B by Zanconato Custom Cycles, on Flickr

[Jonathan]

timeline





















Happy Mother's Day to all of the Mothers

[steve garro]

IMG_1080.JPGIMG_1078.JPGIMG_1086.JPGIMG_1085.JPGIMG_1083.JPGIMG_1082.JPGTall Fella bike completed.
The tall frames take longer, is it just because everything is farther away?
- Garro.

[Eric Estlund]

Goings on-

[Rody]

careysbike1.jpg

careysbike2.jpg

timsbike1.jpg

timsbike2.jpg

timsbike3.jpg

[benson]

A visit from a satisfied customer

[Amaro Bikes]

Epstein still strong inside, so not much hard work :(
Just another 27,5" ready for paintshop:














She's quite a skinny girl, made for stilettos

Illness makes queues!


Cheers.