Hello,
I was wondering if anyone would know of a source for a carbon tubing that I could use to bond into steel seat tube lugs, a la the columbus system, but with a longer tube, probably about 800mm at least. Thanks in advance.
Hello,
I was wondering if anyone would know of a source for a carbon tubing that I could use to bond into steel seat tube lugs, a la the columbus system, but with a longer tube, probably about 800mm at least. Thanks in advance.
check with peter at ceeway. deda has an 800mm ST that it is 35.8 for the seat cluster and up(250mm), 34.9 below with 50mm transition. intended for tube to tube carbon but if you have the metal and tools to ream, it would work fine i bet. just be sure you put your cluster above the transition. that tube is too thin below.
Dedacciai part# MTV350Z113
Nick Crumpton
crumptoncycles.com
"Tradition is a guide, not a jailer" —Justin Robinson
"Mastery before Creativity"—Nicholas Crumpton 2021
Thanks! (sorry for late reply.)
Bookmarks