Bringheli Anvil Dummy Axle Adapter

[busdriver1959]

P.S. Thanks for doing this. It looks great.

[Mike Wanner]

Great Job Todd.

[ToddFarr]

Hey guys,
No problem, it really is such a pleasure to use. This is my favorite jig modification so far. Just the fact that you can use the Anvil Axles to keep the dropouts in phase proved it worth on my latest Single speed build.

1. Mike Wanner
2. busdriver1959
3. GAAP (still waiting confirmation)
4.
5.

I'll let you know how payments going down here in a few days. I'm gonna try to get my e-commerce setup on my website.
Thank you guys for your support and patience on this project!

-Todd.

[Sean in CA]

Put me down for sure, Todd.

[ToddFarr]

Sean, I was secretly holding a spot for you my friend!!!! Even if the list filled up I would have made you an extra!!

One more spot on the list, who wants it. These are getting started later this week I will contact you guys about payment and how everything is going to go down!

Thank you all for your patience and support - Todd

[CyclesNoir]

I'll take one, PM sent

[ToddFarr]

Alright guys,
Here are the details. I should be getting the webstore finished this weekend, and I'm pulling the trigger on the parts. It will be approximately 3-4weeks for delivery after anodizing.
If everyone is okay with this. I'm going to get this order going tonight.

1. Mike Wanner
2. busdriver1959
3. GAAP (still waiting confirmation)
4. Sean in CA
5. CyclesNoir

Thanks - Todd

[ToddFarr]

Update!
Should have these in hand in about 3 weeks after anodizing and all that jazz. I have 10 sets now by the way.
I should have my bank account linked up to my website by then, so I'll post the link when they are ready to go for you all.

There will be a place for a note, please if you are from Velocipede Salon, make sure to write it in this note because each order that comes from here a 10% kickback is going to the forum.

Thanks - Todd.

[ToddFarr]

Taking these to Anodizing tomorrow

Attention all Bringheli Owners by FARR Frameworks, on Flickr

[Mike Wanner]

That looks awesome Todd I can hardly wait to try one out. I’m kind of holding off on the next build so I can use the new fixture.

Mike

[ToddFarr]

Hey everyone,
Thanks for your continued support on this project, the parts are back from Anodizing, the hardware is on order, and these should start shipping out next week. The actual build came in a little more than expected with shipping and driving the parts around to anodizing etc, but to the original 5

1. Mike Wanner
2. busdriver1959
3. GAAP
4. Sean in CA
5. CyclesNoir

I will hold pricing @ $300 + shipping w/o the anvil dummy axle. I've decided not to offer the dummy axle included option right now just due to the logistics of bring them in house and the shipping them back out.

For anyone else the who wants to grab the remaining 5 the price will be $345.00 + shipping.
Thanks - Todd.

[busdriver1959]

Thanks for all of your work on this. Will you be able to PM us with payment details? I don't always catch your updates to this thread right away. I don't want to be a deadbeat.

[Dallas Tex]

Yo Todd,

If assembly is what is holding this up, please feel free to send me the various parts and I'll assemble it myself. No sweat.

[ToddFarr]

GAAP,
Actually ran into a few money issues. I just started an Automation Company 2 weeks ago and it took quite a bit to get it going. I don't want to start collecting $ until at least one is finished and checked completely. I finished a big project this last week for a mobile bottling company so hopefully that will bring some cheddar back in the accounts. I got to be a little more careful since going out on my own, I wasn't making as much as I should of at my last job but it was consistent.

Thanks for understanding - Todd.

[progetto]

Todd, Your honesty is refreshing, you have the right attitude to do well working for yourself.
Bill

[Dallas Tex]

Todd,

I'll pre-pay for mine. I'd bet several others may offer that too. let me know. GT

[ToddFarr]

GAAP,
PM coming your way. All parts are on order and everything is coming in. I'm waiting on the handles and the rules which should be here early next week. I'll be finishing the engraving this weekend, and then milling the slots for the rules. Is everyone using the center hole on their Bringheli for the BB Post?


Engravasaurus Rex by FARR Frameworks, on Flickr


Logos next, then final assembly by FARR Frameworks, on Flickr

Thanks - Todd.

[ToddFarr]

UPS driver just dropped off the handles. Finishing the engraving and dowel hole reaming this weekend. As soon as the rules come in next week these are headed out the door!!!


Just Waiting for the Rules by FARR Frameworks, on Flickr

[busdriver1959]

Todd,

I'll pre-pay for mine. I'd bet several others may offer that too. let me know. GT

Me too.

[ToddFarr]

Everything is all set, and just waiting for the rules. They should be here tomorrow or Tuesday.


Just needs the rule by FARR Frameworks, on Flickr


Rule Slot by FARR Frameworks, on Flickr

Here is what I have so far

1. Mike Wanner
2. busdriver1959 **PAID
3. GAAP **PAID
4. Sean in CA
5. CyclesNoir
6. Bill Bryant **PAID
7.
8.
9.

I'll be contact those who haven't paid with instructions when they are actually ready to ship and in the box mid week, unless you want to pay now, you can PM or email me at farr.frameworks@gmail.com

Thanks - Todd.