Dear Guest,
Please register or login. Content don't create itself!
Thank you
Likes:
0
Friday PicFest No.184
Out takes dumped here atmo.
Re: Friday PicFest No.184
Re: Friday PicFest No.184
Re: Friday PicFest No.184
Re: Friday PicFest No.184
Re: Friday PicFest No.184
More Kelly's SSDCX
Thanks, NATE
Re: Friday PicFest No.184
Lots to do, and little time to take photos:
MAX chainstays brazed in, for those of you with experience of these lugs, you will know what i pain in the arse this can be
Piece designed to be brazed under the fork crown for easy installation of fenders with an M5 bolt
And a cautionary photo: always use lube...
When turning titanium on a lathe
_______________________________________________
Keith Marshall
Kumo Cycles , ACT Australia
Australian Cycle Design and Gasflux Distributor
Re: Friday PicFest No.184
here are two things, which are a bit older (spring or early summer) but never published.
An Al CAAD 4 with a cracked CS. I normally don't do this sort of thing but this was a special favor for someone, who knows the risks.
The bonded joint of this Y-Foil got a bit soft so I completely rebuilt / overbuilt the area:
Re: Friday PicFest No.184
Practice frame #2 is complete. Came out pretty straight. The HT is within 0.1 mm of the ST over 430mm (length of HT checker bar). The rear wheel is centered and within 0.2 mm of the ST over its diameter. Time to cut it up and move on to #3.
New alignment check. Full size tables are sweet!
No BB brazing issues. Liquidy flux is a good thing.
Sunrise from the shop.
Re: Friday PicFest No.184
Bending the rules today. Didn't post last week while building a former customer an African safari rifle. Selling my son's frameset (who has out grown it) 46.5cm ,includes the 26" wheels. Columbus tubing, Freshframe paint, please PM me for details. $1000 with 10% going back to V.S. rifle-before.JPG rifle-375.JPG rifle-mb and cart.JPG rifle-complete.JPG
Attached Images
Re: Friday PicFest No.184
Re: Friday PicFest No.184
Odd week:
Our new friend defending the wood pile.
img_5556.jpg
When someone wants a custom finish, who am I to argue?
img_5551.jpg
New York photographers here for upcoming test in Bicycling. It was good I wrote off the day in advance.
img_5584.jpg img_5586.jpg
Tom Kellogg
Rides bikes, used to make 'em too.
Spectrum-Cycles.com
Butted Ti Road, Reynolds UL, Di2, QuarQ, Conour lite, SP Zero
Steel Cross, X-7, Crank Bros, Concour Lite, Nemesis, Grifo
Steel Piste, D-A Piste, PD-7400, Concour lite, Zipp 404
http://kapelmuurindependent.be
Shortest TFC Member (5'6 3/4") & shrinking
Re: Friday PicFest No.184
I much prefer building bikes to building bike building buildings.
New hoops- hand brushed SA hubs to my last set of Matrix Mt. Titan rims (made in the US):
Penny pocket (milled in). 94 year old copper there:
Winning combo:
Heavy rework (check out my Smoked Out for details ):
Re: Friday PicFest No.184
@02136 this week:
Titanium Road : Post : Stem : Canada :
Titanium Cross : Post : Hong Kong :
Titanium Road : Stem : Taiwan
Titanium Dirt Road : S&S : Germany :
Cheers!
See ya next week!
Re: Friday PicFest No.184
03082 Playlist: The Future Primitives. Waiting on tubes and bits for the next 3 builds so took the time to rework the HT assembly on my frame jig:
Making seat tubes with curves. None of those ripples or kinks either:
Cyclocross all dressed up for the party - See the full build at the New England Builders Ball Friday Oct. 5th, 7pm in "Sunny" Providence, RI:
A short 3 mile climb from the shop doors on some double track brings you up on top of Winn Mtn. Mt. Monadnock in the background to my left:
Re: Friday PicFest No.184
Re: Friday PicFest No.184
IMG_4019.JPG IMG_3986.JPG IMG_3988.JPG IMG_4010.JPG IMG_4011.JPG IMG_4001.JPG I lost my 16+ year old shop helper - RIP old Sally-Girl - we miss you tons and feel your prescence........
Then I got the flu, which I still have.......
Feel like a punching bag and getting behind.
Some shots from this week.
- Garro.
Re: Friday PicFest No.184
left the camera in the shop so I'll have to play catch up next week- until then here's a few snaps of work in progress:
more pics etc
http://flic.kr/s/aHsjCbmZca
Great work everyone, have a great weekend!
Similar Threads
By zank in forum Friday Night Lights
Replies: 18
Last Post: 05-21-2011, 01:25 AM
By zank in forum Friday Night Lights
Replies: 13
Last Post: 05-15-2011, 03:08 PM
By zank in forum Friday Night Lights
Replies: 16
Last Post: 05-08-2011, 04:35 AM
By zank in forum Friday Night Lights
Replies: 22
Last Post: 04-30-2011, 02:58 PM
By zank in forum Friday Night Lights
Replies: 12
Last Post: 02-06-2011, 01:15 AM
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules
Bookmarks