Re: Paragon FD Mount
I've had one on a frame for a few months. Dead easy to install, silver soldered on. Simple to align, weighed 33g/1.16oz. I wouldn't bother making my own to save perhaps 20 grams.
The lower picture is of the derailleur being checked for clearance, with 29 x 2.25 Racing Ralph tyre and 430mm/16.9" chainstays. There was about 5mm from tyre to the cable mech part of the front derailleur.
Cheers,
Ewen
Gellie-Custom-direct-mnt-1.jpg
Gellie-Custom-direct-mnt-2.jpg
Gellie-Custom-direct-mnt-3.jpg
Ewen Gellie
Melbourne Australia
full-time framebuilder, Mechanical Engineer, (Bach. of Eng., University of Melbourne)
[url]www.gelliecustombikeframes.com.au[/url]
[URL="http://instagram.com/gellie_custom_bikes"]http://instagram.com/gellie_custom_bikes[/URL]
Bookmarks