Friday PicFest No.66

[zank]

Off to the wet-works department.







No hang-down here.

[anthonymaietta]

Before


During


After

[Dazza]

A new sloping top tube frame with XL lugs and tubes
a file there
a file here
a braze here
a braze there
another week closer to my new steam loco building workshop {home for the Myford 254}

[John Winston]

Following Dazza with a TIG trials beginning.....from a FNL virginFNL 097.jpgFNL 115.jpgFNL 038.jpgFNL 106.jpg
a little out of sequence, but hey, thanks for lookin-

[steve garro]

pretty haggard this week. Maroon bike = 29er trail bike. 29er dropbar touring bike for up to 2.5"+ tires with plenty of clearance. the first curved toptube Coconino came by for a visit, Brazing. - Garro.

[Tommy Nash]

Unproductive framebuilding week, very busy bicycle shop week.
I did some stuff sticking together...


but mostly I moved and set this thing up...


Thanks Drew!


also we got this in a week ago and I used it today for the first time, it rules!


Cheers,

[edoz]

Curt G suggested I sponsor a race team, good idea.


Coming soon to a mtb race near you. (If you race in the DC area)

[Kevin Maxwell Ostrom]

Finished up another bike to ride. My last one did not make it past year 3 - the head tube began to fail. I used too light of a head tube for my skill/application. This new one is beefy, hoping it will last. The paint is just a rattle can metallic green with a "candy" orange over it to darken it and give it a bit more depth.

[Carl S]

My favorite type of bike. Half road + half cross + half dirt + half commuter = two bikes in one.

[VertigoCycles]

I may have bitten off more than I can chew in the time frame I have. This is a new 29er for me.

[Dave Kirk]

6/18/10 - a day in the shop.

dave

x5.jpgx1.jpgx3.jpgx2.jpgx4.jpg

[Curt Goodrich]

Here's a rando frame hot out of the oven with just primer. A happy customer stopped by while out on a ride. A half completed bike for the slow guy on the team

[Eric Estlund]

In an effort to stay off my leg I've mostly been doing phone/ office stuff this week. Still, hard to not make a little fire...

[Don Walker]

Proof that I actually got some work done!

DW

[Craig Ryan]

Chainstays in, starting on my seatstays.

[conorb]

A chainguard and custom stainless rack.

I need to get the surfaces all brushed so that they match.











Conor

[Dave Anderson]

A custom fork (polished stainless crown & drops) to match a Gios frame (chromed Lugs)....Note: Gios blue is tougher to match that you might think!











Dave