Friday PicFest No.63

[zank]

Wanted to get this kicked off for you guys.

[Eric Estlund]

Headed out the door for a wedding- this one was picked up by one very excited local.









Full set (with build shots) here.

[steve garro]

I had a busy-ass week. built two forks, sent out a killer 650B & forgot to take pictures of it, customer fit sessions, shipping & even two beat down singletrack rides & saw a Coconino in the wild, shown here with Sally-dog. banging out a front triangle today. - Garro.

[Don Walker]

I can't remember posting this... if I did, sorry for the repeat...

DW

[Dazza]

Jay the big fella dropped by to share a Pinot Rose
sip
oh
sip
and
sip
he collected his "Cadenzia"
18 years after his first Llewellyn, which is a still in use MAX tubo
hic
sip
stainless crowns are for the "In" crowd
Another "Custodian" is ready for Joey's NAHBS winning Magic
Cheers
Sip

[Dave Kirk]

Lots of bikes moving through the Kirk Frameworks World Headquarters (KFWH) this week. Started one and shipped a few.

Dave

k4.jpgk1.jpgk8.jpgk6.jpgk2.jpgk3.jpgk7.jpg

[Clockwork]

Just back from Peru.

You could align a frame on this stone made in the 1500's with only other rocks to shape it.
Attachment 21211


Looks like Chris King makes the best water too.
Attachment 21212


Attachment 21215


-Joel

[bellman]

So I was wandering around my shop looking for something to hold a canti stud to trim and file it. I got close to the lathe and the lightbulbs went off...... The tool holder ended up fitting the paragon housing perch as well and the offset head will allow longer pieces to be inserted (think racks) This is my brothers new singlespeed cross bike
Happy Friday everyone.

[Curt Goodrich]

Dubois lugs from back when jerseys were made of wool, cleats were held on with nails and lugs looked like you dug them out of your garden. These lugs were used by Masi, Merckx and sumguy formerly in Chester now some gravel road in Mass.

[conorb]

What was that about stainless crowns for the 'in' crowd?





I concur.

Conor

[YiPsan]

A rohloff bike with XL6.

[bfarver]

Jay the big fella dropped by to share a Pinot Rose
sip
oh
sip
and
sip
he collected his
hic
sip
stainless crowns are for the
Sip

Unreal. I didn't know they made a stainless MAX fork crown.

[cardinal]

It's Friday again. We've been busy! This week we dropped of Ryan's rando bike at paint, and worked on Jeff A's s-bend road machine. It's been raining like there's no tomorrow.

Today we dropped in on Brett and used our Monarch to cut a fork crown race. It's un believable! We should take delivery next week! (still trying to get electrical in the garage sorted).

We'll be posting some painted bikes next week...