Looking for one of each of the Scotch-Brite belts for my own home frame "conditioning."
Probably like 3/4"-2" x ~12-20" belts. Not even sure what's out there.
Anybody? Figured the framebuilders would know best.
Looking for one of each of the Scotch-Brite belts for my own home frame "conditioning."
Probably like 3/4"-2" x ~12-20" belts. Not even sure what's out there.
Anybody? Figured the framebuilders would know best.
John - should I not even bother with the other two grades?
If it's just for light 'touchup' work to even out the finish a couple of times a season I'd start with a very fine grit. 80 grit scotchbrite takes a pretty good bite; this one will have more of a polishing effect and less of an etching one.
I have been getting mine from Mike @ Abrasive Specialties (1-262-966-7566) Granted he is making them for me and my HF 13" pneumatic air sander (which has actually been very good....can't beat $20 vs the cost of a Dynafile!) He sells them individually and I have been happy with both the red and blue belts. Just make sure to ask him about the shipping (alternatives!) as it is a tad high for the lightweight belts. Let me know if you need his email address.
Bookmarks