Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Fixed it for you!
2016-12-03 13.06.34 by sevencyclist, on Flickr
2016-12-02 22.46.34 by sevencyclist, on Flickr
S&S 27.5" MTB ready to ship to Reno
IMG_4164.JPGIMG_4169.JPGIMG_4174.JPGIMG_4179.JPGIMG_4180.JPG
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Andrea "Gattonero" Cattolico, head mechanic @Condor Cycles London
"Caron, non ti crucciare:
vuolsi così colà dove si puote
ciò che si vuole, e più non dimandare"
Right in there - pale green or sage?
Thanks you guys!!!!
I really appreciate it.
- Garro.
IMG_4164.JPG
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
IMG_1093.jpg15390899_10154421753048183_5138984259290437323_n.jpg
Green bikes made it safely to their new homes
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
IMG_4247.JPGIMG_4249.JPGIMG_4250.JPGIMG_4251.JPG
Some photos of the Mountain Cruiser that went off to paint
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
IMG_3604.JPG
This 30+ lb Jack Crevalle aka "toro" destroyed it, the line, and gave me a Nantucket sleigh ride for 30-40min!
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
IMG_4275.JPGIMG_4290.JPG
Almost done!
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
When I'm not thinking, I'm thinking about thinking:
Thinking about resolutions bike wise:
1: No BB shells under 73mm again unless a NOS unit is supplied and made for appropriate width tires of the era.
2: No OLD's of under 135 except special cases (see #1)
3: I will make bikes with rear spacing of 135mm and Boost 148mm with appropriate cranks
4: 440 ATC on rigid forks max
5: No curved blade forks with discs - just no.
6: Make a run of rigid MTB's along the lines of the MB-1 with lugged forks, 1.125" top tubes, 1.25" down tubes and rim brakes
7: Mountain Cruisers = YES
8: Frames & forks will be priced "No Paint" but I can facilitate paint, but 1st I'll be PIF on my frame work & you pay the painter - I'll still be glad to built it for you if you choose.
9: I'll lace wheels for people again separate of bike purchases as I have made time for that.
10: Fully rigid bikes will be made with a 1.125" head tube, as they should be.
11: Modern MTB parts and road parts shall not mix.
12: Rigid forks shall be 9mm QR
13: Rigid forks with frames only.
14: I build for 120mm travel forks max.
15: I build for 3.0" tires max.
16: NO BUILD QUEUE - one bike at a time.
17: NO DEPOSITS - one bike at a time.
18: All shipping of anything to anywhere paid by client.
More later as I jell my "new" business model, as after the next bike, I have no orders here at Coconino Cycles for the 1st time in 14 years.
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Finished Mountain Cruiser:
IMG_4330.JPGIMG_4341.JPGIMG_4343.JPG
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Andrea "Gattonero" Cattolico, head mechanic @Condor Cycles London
"Caron, non ti crucciare:
vuolsi così colà dove si puote
ciò che si vuole, e più non dimandare"
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
IMG_4343.JPG
#6 will happen sooner then later - keep posted - they will be so slick.
#7 = Mountain Cruisers ain't going nowhere!
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
IMG_0677.JPG
And next we have.........
- Garro.
Steve Garro, Coconino Cycles.
Frames & Bicycles built to measure and Custom wheels
Hecho en Flagstaff, Arizona desde 2003
www.coconinocycles.com
www.coconinocycles.blogspot.com
Bookmarks