Dear Guest,
Please register or login. Content don't create itself!
Thank you

Likes:
0
-
new Al cablestops.....re-heat treat
I put a post up on the spooky smoked out page....but I have some other questions regarding my issue.....
I'm considering new cablestops on my Spooky Havocstaff......wood I need to have the frame re-heat treated if I welded on new stops.........or should I consider rivet-on stops?
-
Re: new Al cablestops.....re-heat treat
whats it made out of 6 or 7 series.............mickeys prolly your best man
-
Re: new Al cablestops.....re-heat treat
I'm not framebuilder, but I can tell you that I see quite a few #70xx series alloy frames "blooming" by corrosion starting right were the cable stops are riveted. A partial cure is to epoxy the holes prior riveting
"Caron, non ti crucciare:
vuolsi così colà dove si puote
ciò che si vuole, e più non dimandare"
Similar Threads
-
By Willie1 in forum The Frame Forum@VSalon
Replies: 35
Last Post: 07-11-2014, 11:35 AM
-
By defspace in forum The OT
Replies: 6
Last Post: 07-30-2013, 12:02 PM
-
By Too Tall in forum The OT
Replies: 0
Last Post: 10-04-2011, 10:20 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks