Dear Guest,
Please register or login. Content don't create itself!
Thank you
-
Friday PicFest No.266
Sorry I missed the last two FNLs.
I need to go to the painter(s) by Zanconato Custom Cycles, on Flickr
I need to go to the painter(s) by Zanconato Custom Cycles, on Flickr
I need to go to the painter(s) by Zanconato Custom Cycles, on Flickr
I need to go to the painter(s) by Zanconato Custom Cycles, on Flickr
Rene B by Zanconato Custom Cycles, on Flickr
Rene B by Zanconato Custom Cycles, on Flickr
Rene B by Zanconato Custom Cycles, on Flickr
Jorn A by Zanconato Custom Cycles, on Flickr
Jorn A by Zanconato Custom Cycles, on Flickr
Jorn A by Zanconato Custom Cycles, on Flickr
-
Re: Friday PicFest No.266
Start of a SS cross frame...
IMG_1011 by Nate Zukas, on Flickr
IMG_1014 by Nate Zukas, on Flickr
IMG_1016 by Nate Zukas, on Flickr
IMG_1021 by Nate Zukas, on Flickr
IMG_1025 by Nate Zukas, on Flickr
IMG_1027 by Nate Zukas, on Flickr
IMG_1029 by Nate Zukas, on Flickr
Dinner with my wife, celebrating 10 years of marriage!
10157201_10202786956306985_1142622013_n by Nate Zukas, on Flickr
Thanks! NATE
-
Re: Friday PicFest No.266
Jeff put his bike together, paint by the great Neil CERNITZ!
Jeff's Road Frame by FARR Frameworks, on Flickr
Jeff's Fillet Road Bike by FARR Frameworks, on Flickr
For those of you who are wondering, I recently relocated to Taiwan for a job opportunity. The move and transition was pretty tough so I've been flying under the radar. I apologize to anyone I didn't get back to these last few months.
I'll be spending a few years over here in Asia. I'm gonna focus on building my brand and designing a full line of framebuilding equipment. I'm also trying to get in with some small factories or builders to hone my skills and really get some torch time. When I come back to the US I should be able to hit the ground running.
-Todd
-
Re: Friday PicFest No.266
John's ACB Fillet Disc Cross. Thanks! Dave
(PS: John asked me to leave the steerer uncut prior to shipping it.)
There are more photo here if anyone is interested: https://www.flickr.com/photos/anders...7644038792361/
-
Re: Friday PicFest No.266
-
Re: Friday PicFest No.266
Travel log:
From the studio (photos by Anthony Bareno)- "Sean-nos" road frame for bigger tires/ mudguards
Full set and description here.
-
Re: Friday PicFest No.266
It's been waaay too long since I posted in FNL. Here's a recent dump.
-
Re: Friday PicFest No.266
A bike made by a French-Canadian for a Belgian guy with Italian tubes. Stijn MAX frame is going to paint.
-
Re: Friday PicFest No.266
It was a great week.
Post mount is better
-
Re: Friday PicFest No.266
-
Re: Friday PicFest No.266
-
-
Re: Friday PicFest No.266
Let's Weld Us Some 650b :
Sworn to Shred - Born to Burn...
Big Friends : Long Trails : One Last Visit from Old Man Winter
-
Re: Friday PicFest No.266
Darkest night is just before dawn
-
Re: Friday PicFest No.266
a 650b and road bike ready to ship out next week...Fire engine red and British racing green
DSC_0067.jpg
DSC_0076.jpg
DSC_0087.jpg
DSC_0089.jpg
thanks
-justin
-
Re: Friday PicFest No.266
Hey People.
Some thing have been happening here.
I am re-finishing this Merckx in familiar colours.
The paint masks in high bake yellow mask. Doing all of my own vinyl cutting has made my life so much easier. The guy I used to use fired me some years ago cause he hated cutting all the small stuff. I've been dopiung it myself ever since.
Merckx Masks.jpg
With the colours down prior to cut-out filling.
Eddy Top Eye.jpgMerckx1.jpgMerckx2.jpg
And then, having a decal party. I use these wood tools to rub the decals down and release them from the application layer. I have found many of my ceramic tools have become my paint and shop tools.
Decal Tools.jpgMerckx decals.jpgMerckx Decals1.jpgMerckx Decals2.jpg
I Sent this old Peugeot out a few weeks ago. It was an awesome POS frame with sentimental value. I wasn't going to show this because it is weird. The customer wanted to use modern components and of course the old frames had flat sheet drop-outs with no hanger. I had a few Ritchey drop-outs so I cut one up, sanded it flat and brazed it on. I added some inserts to the inside plates as well to give a little more clearance for a modern casette.
Peugeot1.jpgPeugeot2.jpg
The stencils made me teary eyed and mindful of those who have been recently lost by those close to me.
Grazie1.jpgGrazie2.jpgGrazie3.jpg
I also did 100miles on the old Olmo last Sunday and will again this Sunday. It was hard. It was fun.
1966213_607154629377047_7387434382339091545_o.jpg10151925_607154756043701_1934402743439030673_n.jpg
Hope you're all well,
Noah
-
Re: Friday PicFest No.266
Adventure Bike Painted Head Tube Logo
Adventure Bike Sleeved Seat Cluster
Adventure Bike Driveside View
Hattie out on her Columbus Steel Road Frame for the first time. The smile says it all!
Loopwheels Kickstarter Backer frame...fun little project!
-
Re: Friday PicFest No.266
-
Re: Friday PicFest No.266
-
Re: Friday PicFest No.266
It's been a busy week, here in Hølen, Norway...
The "Rough Stuff Workshop" continued:
IMAG0482 by Johnsen Frameworks, on Flickr
Some extra curricular activies where performed:
IMAG0514 by Johnsen Frameworks, on Flickr
A happy bloke got his first frame complete:
IMAG0568 by Johnsen Frameworks, on Flickr
The moon came out:
IMAG0554 by Johnsen Frameworks, on Flickr
And so did the sun!
IMAG0582 by Johnsen Frameworks, on Flickr
And I got my Rough Stuff frame all brazed up!
IMAG0587 by Johnsen Frameworks, on Flickr
For those of you who missed the Rough Stuff video that I published a couple of weeks ago, it can be found here:
Well, that's the news from Hølen, where all the women are strong, all the men are good looking, and all the children are above average.
Cheers,
Truls
Similar Threads
-
By e-RICHIE in forum Friday Night Lights
Replies: 18
Last Post: 04-13-2012, 11:20 PM
-
By steve garro in forum Friday Night Lights
Replies: 12
Last Post: 02-12-2012, 06:47 PM
-
By e-RICHIE in forum Friday Night Lights
Replies: 14
Last Post: 11-22-2011, 05:04 AM
-
By steve garro in forum Friday Night Lights
Replies: 20
Last Post: 11-14-2011, 05:30 AM
-
By e-RICHIE in forum Friday Night Lights
Replies: 18
Last Post: 11-10-2011, 06:30 AM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks