I made the whole shebang. My wife bought me the plans and all it takes is some 5/4 pt decking, some screws and follow the templates. Pretty easy with a 12 pack.
I plan to make the whole chair out of skis and a matching bench.
I found some plans from Yankee mag to do this as well but after thinking about their design, couldnt figure out how to make it actually be stable with some fat asses sitting. Didnt seem to have any real strength to it.
Google the plans from Yankee and let me know if you can figure it out!
I found some plans from Yankee mag to do this as well but after thinking about their design, couldnt figure out how to make it actually be stable with some fat asses sitting. Didnt seem to have any real strength to it.
Google the plans from Yankee and let me know if you can figure it out!
bad plan I pan to modify an Adirondack design ....... tooling and design are not my problem
Where could the plans for the chairs be found that your better half bought?
Thanks for the help/direction.
skichair.com crazy right? I believe the plans were around $50. Once I got them I had some extra copies made at a copy place to make sure I didnt f up the originals. I havent made an ottoman and have no desire to.
I attended the Proctor Academy graduation on Saturday, and afterward, while cruising around campus, stumbled upon these chairs and was reminded of this thread. I was told by my 14-year-old cousin-of-sorts that they were a senior project. Very cool.
found some use for a bunch of old skis in the basement. surprisingly comfortable. still working on beverage holder....
I raced on those Salomons BITD. Rad. Very cool projects!
We have a local guy (skichair.com) that sponsors a bunch of us for the Tuesday night beer league. I guess there's a decent market for these. You could have a little side gig going!
Bookmarks