Dear Guest,
Please register or login. Content don't create itself!
Thank you
Likes:
0
Re: Friday PicFest No.67
Great forum guys, this is our first post here - thanks Josh!!
We've just begun building this Blue Beauty - will be completed over the weekend.
Customer picking up the Eggplant GTR tonight. Stunning!
Breather holes in the dropouts - Good stuff Dave!
Attached Images
_______________________________________________
Baum Cycles
Passion Precision Performance
Handcrafted Titanium and Steel Custom Bicycles
w:
www.baumcycles.com
e:
[email protected]
t: +61 3 5277 1933
Friday PicFest No.67
i am still on leave but this thread must be launched atmo.
here - twenty years ago this month...
Re: Friday PicFest No.67
Thursday is the new Friday. FGIT! Newvex and sidetacks this week.
Dave
f5.jpg f1.jpg f4.jpg f2.jpg f7.jpg f6.jpg
Re: Friday PicFest No.67
Re: Friday PicFest No.67
yet another XL sloping top tube frame
some wheel building
130 kgs of Cadenzia, Custodian lugs, Limpets and 72* dropouts ships on Monday
and
it has been Friday here for more than eight hours
and I got my 2.5 hrs on my fixie in
taking Friday off to go to the Queensland archieves with Ginger
to get the full set of 1914 workshop drawings for my 7 1/4" gauge live steam loco project
a QR C18 #693 as it was in 1915 {it will be a 10 year + project}
Attached Images
Re: Friday PicFest No.67
The spacing of the down tube panels was determined by the fibonacci sequence...seriously.
A bit more clean up on the edges of the lines, then on to the clear coat
A peak under the hood
A peak of the hood
PS Anyone successfully linked photos in here from the *new* Flickr? Suggestions?
Anthony Maietta
Web Site |
Blog |
Flickr
"The person who says it can not be done, should not interrupt the person doing it."
Re: Friday PicFest No.67
A couple of forks ready for the nickel plating. Look similar, but functionally, radically different. Custom is as custom does.
FNL5a.jpg FNL5b.jpg
Fork for small woman's sport bike; 52mm rake, Deda light blades, trimmed from the top for thinner taper. Comfortable and stable.
FNL5c.jpg FNL5d.jpg
Fork for a track frame; 38mm rake, Columbus SP blades, trimmed from the bottom. Super stiff, immobile.
FNL5e.jpg
1.125" steerer with a 1.0" crown (on the track fork).
Tom Kellogg
Rides bikes, used to make 'em too.
Spectrum-Cycles.com
Butted Ti Road, Reynolds UL, Di2, QuarQ, Conour lite, SP Zero
Steel Cross, X-7, Crank Bros, Concour Lite, Nemesis, Grifo
Steel Piste, D-A Piste, PD-7400, Concour lite, Zipp 404
http://kapelmuurindependent.be
Shortest TFC Member (5'6 3/4") & shrinking
Re: Friday PicFest No.67
Team frames are done. If you need me this weekend you can find me in the paint booth.
From this:
To this:
Re: Friday PicFest No.67
Here is another steel Dirt Road, I' love these things. This one is on its way to CO.
Attached Images
Re: Friday PicFest No.67
Drop out finishing, and sneak peeks into the new shop beginnings...
Re: Friday PicFest No.67
My version of Singer bleu.
Attached Images
Re: Friday PicFest No.67
Attached Images
Re: Friday PicFest No.67
Bi-Laminate's the word!
Fitup
sw rs 001.jpg
Ready to tack
sw rs 002.jpg
Brazed
sw rs 003.jpg
Soaked
sw rs 004.jpg
Finished!
sw rs 005.jpg
Inspectors in training, they're a couple of clowns!
resize 001.jpg
Rumor control
Alive and extremely well.
2000lbs of iron. Cross bikes underway. My post tacking inspection.
Thanks for looking.
Re: Friday PicFest No.67
A rack to go with a bike.
Attached Images
Re: Friday PicFest No.67
All in a days work....
DW
Re: Friday PicFest No.67
Cleared for shop duty- built some cargo bike forks:
Re: Friday PicFest No.67
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules
Bookmarks