Zukas Cycles

[Nate Zukas]

IMG_2136 by Nate Zukas, on Flickr

[Lionel]

Despite all the Shimano crap I am going to give this one an A.

Let me know if you can keep these hoods flush and if this brakes do not make any noise ;)

[Matthew Strongin]

IMG_2136 by Nate Zukas, on Flickr

Nate, you killed it! And it's been a ton of fun watching things come together and talking through all the details with you. I can't wait to get out on it.

[boots2000]

Can you post a build sheet with angles, lengths, etc.?
Very well proportioned bike.

[Lionel]

Nate weight of the frame too please.

[Nate Zukas]

Nate weight of the frame too please.

Lionel, I weighed mine and it was a click above 4lbs. Mine is about the same size as Matt's. Not bad considering the added seatmast. I wish mine had those Polydrops! My total weight is just under 16lbs. with 1 x 11 DT, mechanical discs and a alloy wheelset. A safe bet for Matt's would be right at 18 or just below with his hydro brakes and 2 x 11 DT. Hope to see you at Ballers!
NATE

[Lionel]

Lionel, I weighed mine and it was a click above 4lbs. Mine is about the same size as Matt's. Not bad considering the added seatmast. I wish mine had those Polydrops! My total weight is just under 16lbs. with 1 x 11 DT, mechanical discs and a alloy wheelset. A safe bet for Matt's would be right at 18 or just below with his hydro brakes and 2 x 11 DT. Hope to see you at Ballers!
NATE

Thanks. Baller is cancelled though ;( Hope to see you at ballers west ;)

[sk_tle]

I love that bike.

[Nate Zukas]

Can you post a build sheet with angles, lengths, etc.?
Very well proportioned bike.

Here ya go!
2016-02-07_11-31-18 by Nate Zukas, on Flickr

[colker]

IMG_2136 by Nate Zukas, on Flickr

It´s my size/ fit and (in my mind at least) pays hommage to late 80s Ibis SS.