Friday PicFest No.409

.

Quote:

---

I have a greater responsibility than you could possibly fathom.

---

More here -
Crystal Clear | RICHARD SACHS CYCLES




https://c1.staticflickr.com/1/589/31...001afdf4_b.jpg

Attachment 99577Attachment 99578Attachment 99579

A few more details to take care of and then off to paint.

https://c1.staticflickr.com/1/748/31...3f020042_b.jpg
Josh M by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/449/32...a65bd3ce_b.jpg
Josh M by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/531/31...b92996e0_b.jpg
Josh M by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/365/32...bec46ecd_b.jpg
Josh M by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/345/31...8bcdbb4f_b.jpg
Josh M by Mike Zanconato, on Flickr

Ready to assemble....

https://c1.staticflickr.com/1/661/32...2fb76fb3_b.jpg
Larry R by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/486/31...aa671185_b.jpg
Larry R by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/339/32...e6468a94_b.jpg
Larry R by Mike Zanconato, on Flickr

https://c1.staticflickr.com/1/624/32...b6fbc2c5_b.jpg

https://c1.staticflickr.com/1/266/32...01cdfe4c_b.jpg

https://c1.staticflickr.com/1/436/32...73d459d7_b.jpg

https://c1.staticflickr.com/1/782/31...55b91b3e_b.jpg

Cross Town Traffic:

https://lh3.googleusercontent.com/sv...=w1280-h800-no

https://lh3.googleusercontent.com/EX...=w1280-h800-no

https://lh3.googleusercontent.com/8-...=w1280-h800-no

More C-04 practice.

https://c1.staticflickr.com/1/393/31...9e6d7c5a_b.jpg

No file, just 100 grit. Getting better.
https://c1.staticflickr.com/1/739/32...062c0c07_b.jpg

https://c1.staticflickr.com/1/319/32...c4d9d1c7_b.jpg

First of a new series of practice frames.

https://c1.staticflickr.com/1/295/31...aee0b56f_b.jpg

https://c1.staticflickr.com/1/717/32...473d0d19_b.jpg

https://c1.staticflickr.com/1/719/31...9d2209d6_b.jpg

https://c1.staticflickr.com/1/326/32...69c0ea9d_b.jpg

https://c1.staticflickr.com/1/731/31...5709b102_b.jpg

https://c1.staticflickr.com/1/488/32...df96c915_b.jpg

I've been working on improving my filament winding process. Note the tapered and oblate shape: making life difficult in two of the three axes.

https://c1.staticflickr.com/1/596/32...25cd3981_b.jpg
Compression Wrap

https://c1.staticflickr.com/1/748/31...8ded528d_b.jpg
Compression wrap 2

https://c1.staticflickr.com/1/567/32...e95eae90_b.jpg
Crossed CS

Prepreg is still the go for some things, like my first use of T47 BB:

https://c1.staticflickr.com/1/667/32...376a7989_c.jpg
BB_47 Wrapped

They are coming

https://c1.staticflickr.com/1/392/32...e7c61074_b.jpg

to be with these

https://c1.staticflickr.com/1/542/32...1140cec4_b.jpg

HT 36, TT 31.7, DT 35, ST 31.7 , SS 17mm , a Cadenzia version for level top tube

https://c2.staticflickr.com/6/5655/3...52e2a692_b.jpg

https://c1.staticflickr.com/1/722/32...231fb779_b.jpg

https://c1.staticflickr.com/1/539/32...b972257c_b.jpg

The Crescendo version for sloping top tube.

https://c1.staticflickr.com/9/8559/3...1c970fc6_b.jpg

https://c1.staticflickr.com/1/460/32...b42fcabd_b.jpg

https://c1.staticflickr.com/1/734/31...35270007_b.jpg

https://c1.staticflickr.com/1/577/31...0c3997e9_b.jpg