the window is open for you nuts in the pacific
rim, or anyone else shooting kodachrome atmo.
Printable View
the window is open for you nuts in the pacific
rim, or anyone else shooting kodachrome atmo.
1. Mill dropouts plugs to size, vent drill.
2. Before & after.
3. Blade length trim.
4. Mitering fixture.
5. Money shot.
6. Cleaning up the flash.
7. Prep for welding.
8. Finished crown miters.
9. DO fit.
10. Loaded in fixture & tacked.
11. Install disc brake tab.
12. Installed on wheel.
Attachment 9866
Attachment 9867
the bike with the curved tubes from before:
http://farm4.static.flickr.com/3585/...1f38d2fc1e.jpg
http://farm4.static.flickr.com/3617/...a74841a0_b.jpg
XCr align
and some inspiration for Frank Patterson from Mark in Bristol
I got two of these in between work and dinner.
http://farm4.static.flickr.com/3545/...f0955fba_b.jpg
"I want dark metallic blue, red/white decals, and curved white lines...you do the rest."
First coat of clear still very liquid...
http://farm4.static.flickr.com/3647/...7f19b3_b_d.jpg
http://farm3.static.flickr.com/2634/...8a9dc7_b_d.jpg
http://farm3.static.flickr.com/2662/...3db086_b_d.jpg
More:
http://www.flickr.com/photos/2858324...7620507497320/
I found a different plating company that does beautiful and tough chrome.
David
Cross season is coming--new bike for me :)
It's hot in Portland. It hit about 95 today and the garage was not cooler than outside. Nate working on s-bends:
http://farm3.static.flickr.com/2568/...97ec5a0f_b.jpg
http://farm4.static.flickr.com/3556/...736e8980_b.jpg
http://farm3.static.flickr.com/2448/...b57d3e15_b.jpg