Re: Friday PicFest No.319
Re: Friday PicFest No.319
4 Attachment(s)
Re: Friday PicFest No.319
Crappy pictures of a very green frame. In keeping with the theme, 1" chainstays are beefy. Call it the Incredible Hulk, maybe.
Attachment 80264Attachment 80261Attachment 80262Attachment 80263
Re: Friday PicFest No.319
8 Attachment(s)
Re: Friday PicFest No.319
A bit of a side project for a friend. It's a late 60's Norton frame that needed new down tubes and an extended swing arm.
Cut out the dented and bent down tubes then pried the frame open slightly to fit in new tubes with inner sleeves on both ends.
Attachment 80270
I used 3 spot welds to hold the inner sleeves in place for the down tubes. Before making a fusion pass and fill pass.
Attachment 80271
Here are the extensions for the swing arm.
Attachment 80276
The swing arm had to be held in a temporary fixture.
Attachment 80272Attachment 80273
I fused the sleeve to the tube insert then fused it to the swing arm tube.
Attachment 80275Attachment 80274
The finished swing arm welds.
Attachment 80277
Back to building carbon bicycle frames. Welding tubing this thick with an air cooled torch is no fun.
5 Attachment(s)
Re: Friday PicFest No.319
Re: Friday PicFest No.319
5 Attachment(s)
Re: Friday PicFest No.319
Attachment 80304Attachment 80305Attachment 80306Attachment 80307Attachment 80308
And after all God can keep my soul
England have my bones
But don't ever give me up
I could never get back up when the future starts so slow
No longing for the moonlight
No longing for the sun
No longer will I curse the bad I've done
If there's a time when your feelings gone, I wanna feel it
- Garro.
7 Attachment(s)
Re: Friday PicFest No.319
Mitering tubes for the next two builds Attachment 80339 Extended stem spacer Attachment 80340 Fly cutterAttachment 80341 New stem and spacer for my personal bike Attachment 80342 Mitering Attachment 80343 custom stem cap Attachment 80344
14 Attachment(s)
Re: Friday PicFest No.319
