in another week or so i will move into the new studio. it
may take between an hour and a month to get it all sorted
out, but ultimately i WILL work on frames again atmo...
http://farm5.static.flickr.com/4039/...26d0ca20_o.jpg
Printable View
in another week or so i will move into the new studio. it
may take between an hour and a month to get it all sorted
out, but ultimately i WILL work on frames again atmo...
http://farm5.static.flickr.com/4039/...26d0ca20_o.jpg
top to bottom - dirt roadster project that will be done tomorrow {hurrah} Denise's current quiver, the fillets that made me decide to offer unfiled frames for 10'. you all will know 1st. good night.......Garro.
Attachment 15262
-Joel
White and SRed.
so much to do
seems I run out of time every day
and not even getting good quiet time at the bench
listening to the Aussie v The West Indies test cricket
Lug of the Irish.
Dave
Some more assembly required, but here is a stock large demo cx bike and stem prototype #2. Trying to keep this on a budget I just did a rattle can finish in the hall: ford blue panels and the rest clearcoat. Put together some panoramas of the new shop when I moved in 5 months ago and how it looks this week- no more mold on the walls, no more leaky roof! Its hard to tell in the early shop photos how filthy the place actually was- but it was gross!
Random shots from a random week including a bit of pre-seat stay clean up, pre-paint detailing, and pre-plating construction. Lots of pre-ness.
http://farm5.static.flickr.com/4010/...d4376bc214.jpg
http://farm3.static.flickr.com/2559/...0de22b5e41.jpg
http://farm3.static.flickr.com/2774/...2a7af4fbe3.jpg
My first one of these.
he works the foot pedal :cool:
in the paint process
Should get it early next week and then out to Illinois.
http://www.vendettacycles.com/pics/p..._paint-001.jpg
http://www.vendettacycles.com/pics/p..._paint-002.jpg
http://www.vendettacycles.com/pics/p..._paint-006.jpg
http://www.vendettacycles.com/pics/p..._paint-004.jpg
Conor