Wayne's Llewellyn Lucentezza
The Cadenzia lug set emanated from a discussion I had during a visit to Dario Pegoretti's workshops in Caldonazzo in 2009. The name comes from a South Australian wine that I like. This lug set fits XL or DOO size tubes . ("UOS" is a more recent marketed name for the same tube size) For Wayne's frame set I will use for the first time the final version of the new socket seat stay seat lug, which has larger flowing fillets to the surfaces for aesthetic desires.
https://c1.staticflickr.com/1/468/31...f97aa4de_b.jpg
https://c1.staticflickr.com/1/542/32...1140cec4_b.jpg
https://c1.staticflickr.com/1/329/31...c5ecd4d8_b.jpg
https://c1.staticflickr.com/1/433/32...6704041d_b.jpg
https://c1.staticflickr.com/1/574/31...3997c404_b.jpg
Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
A short break from the bench to admire
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
[QUOTE=Dazza;828043][COLOR="#0000FF"]This is the final version with revised fillets. I will have these lugs and frame sets with these lugs on show at Bristol "Bespoked" 2017. [/COLO
Are those seat lugs available for purchase yet please? Also, what is the diameter of the seat stay socket? I am pleased to learn that you will be at Bristol again. I publicised that elsewhere on here.
http://www.velocipedesalon.com/forum...how-46580.html
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
[QUOTE=Paul Jacobs;828183]
Quote:
Originally Posted by
Dazza
[COLOR="#0000FF"]
This is the final version with revised fillets. I will have these lugs and frame sets with these lugs on show at Bristol "Bespoked" 2017. [/COLO
Are those seat lugs available for purchase yet please? Also, what is the diameter of the seat stay socket? I am pleased to learn that you will be at Bristol again. I publicised that elsewhere on here.
http://www.velocipedesalon.com/forum...how-46580.html
I'm obviously not Dazza but I did remember him posting this. The seat stay ports are 17mm. Also, Dazza's linked post answers my question about there being a sloping top tube variety.
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
[QUOTE=Paul Jacobs;828183]
Quote:
Originally Posted by
Dazza
[COLOR="#0000FF"]
This is the final version with revised fillets. I will have these lugs and frame sets with these lugs on show at Bristol "Bespoked" 2017. [/COLO
Are those seat lugs available for purchase yet please? Also, what is the diameter of the seat stay socket? I am pleased to learn that you will be at Bristol again. I publicised that elsewhere on here.
http://www.velocipedesalon.com/forum...how-46580.html
Bristol "Bespoked" is a great gig, in a venue that is dear to my heart. (The original GWR Temple Meads station by Brunel) Great people and a fun time and some fine ales. I am looking forward to the trip.
17mm seat stays. Standard Columbus XL- DOO tubes. These new seat lugs will be available as an option in the Cadenzia and Crescendo lug sets some time in February.
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Whrrrrrrrrrrrrrrrr, whrrrrrrrrrrrrrrrrrr,
whrrrrrrr
https://c1.staticflickr.com/1/738/32...5fe48d55_b.jpg
file file file
https://c1.staticflickr.com/1/430/32...ed1771f4_b.jpg
scribble scribble (down under technical term for marking out)
https://c1.staticflickr.com/1/433/31...b3460d07_b.jpg
Whizzzzzzzzzzzzzzzzzzzzzzzzzz
https://c1.staticflickr.com/1/362/32...f11c0b91_b.jpg
file file file
https://c1.staticflickr.com/1/429/31...59ab3371_b.jpg
It is Wine o'clock, I am off to watch the Aussies chase the Pakistan total
I will finish this lug tomorrow
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
A wee bit more of the whrizzzzz, whrrrrr and file file
https://c1.staticflickr.com/1/553/31...7046d843_b.jpg
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
By the start of 2005 I was doing my own 3D CAD drafting, rather than farming it out and the resultant loss of interpretation from what was intended in my cranium to what the investment casting became. As an uneducated sod I jokingly called this process my PhD in frame making. I got the large text books and spent many evenings going through page by page the process of parametric modeling. I started simple and in steps escalated the complexity. In 2006 it was time to design and produce the Llewellyn dropouts. I took in the details of good dropouts I have used in the past and mixed in my desires. Lots of time on the 3D CAD program and after confirmations and tweaks via 3D printing some rapids, out of the mix came the dropouts. Hard to believe it was over ten years ago. Crikey! Wayne's drops are on the bench for a wee while of pondering.
https://c1.staticflickr.com/1/416/32...10b3cc93_z.jpg
https://c1.staticflickr.com/1/659/32...78ee1132_b.jpg
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
"Whoops" "You stupid #%&*#!!!$*&##!! Wally! You will have to start again with another left hand drop"
Do you spot the mistake?
https://c1.staticflickr.com/1/732/32...a56224c5_b.jpg
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set