Paul's Llewellyn Cadenzia is leaving
Re: Paul's Llewellyn Cadenzia is leaving
Are you supplying components as well Darrell?
Re: Paul's Llewellyn Cadenzia is leaving
Quote:
Originally Posted by
progetto
Are you supplying components as well Darrell?
Yes I do, happy to supply complete bikes or some parts if the client is sourcing. All the international orders are frame sets as the cubic of shipping a bike is not worth the gold coin
Re: Paul's Llewellyn Cadenzia is leaving
Very neat, especially the finishing of the bar tape, is it rolled with some thin braid?
Personally I don't dig the Hope headset and topcap here, it spoils the grace of that stem. But I guess the owner is happy :noworry:
(and front tyre in the wrong direction)
Re: Paul's Llewellyn Cadenzia is leaving
Quote:
Originally Posted by
Gattonero
Very neat, especially the finishing of the bar tape, is it rolled with some thin braid?
Personally I don't dig the Hope headset and topcap here, it spoils the grace of that stem. But I guess the owner is happy :noworry:
(and front tyre in the wrong direction)
Nothing rolled
That is waxed thread, used in leather work, wind with the loop underneath and thread and pull through, cut and pull through the other way and cut and the end is hidden, a technique fancy mechanics learn from the wise old ones.
Campag stopped making 1 1/8" head sets, sigh!
As a team mechanic from yesteryear I was in contact with Vittoria and Veloflex for many years as they were sponsors of the Aussie team and the tyre direction stuff for road tyres is actually nonsense, 99% for marketing purposes, especially as the herring bone tread is not even .5mm deep. The tyres mobs, said, put the label on the R/H side. I am not making that up!
Still using M5 and M6 stainless studs and nyloc nuts here, no problems with fender mounting
still using normal cromo steel in my CS bridges, just like the rest of the world has done for a 100 years, still no problem.
Re: Paul's Llewellyn Cadenzia is leaving
I think the Hope headset is fine as it matches the Deda bars and carbon seatpost and it is good to see at least one British part on a beautiful bike. I like the thread whipping on the bar tape too. I have learnt so much from Dazza's posts over the years. They are like a ongoing tutorial in frame and bike building.
Re: Paul's Llewellyn Cadenzia is leaving
Quote:
Originally Posted by
Dazza
Nothing rolled
That is waxed thread, used in leather work, wind with the loop underneath and thread and pull through, cut and pull through the other way and cut and the end is hidden, a technique fancy mechanics learn from the wise old ones.
....
That is nice.
Seems we're calling the same thing in a different way. Back in the day we used the same principle to make the ends of those 12mm ropes used in summer and winter camps.
p.s.
I too know that is virtually impossible to distinguish when a GP4000 is fitted back-front :blink1:
Blue is a nice colour for a reply, you have good memory.
John's Voyageur (rando) frame metal work
Re: John's Voyageur (rando) frame metal work
That's more than just a rack :cool:
The bar is set very high now.
Re: John's Voyageur (rando) frame metal work
Quote:
Originally Posted by
Gattonero
That's more than just a rack :cool:
The bar is set very high now.
Thank you. I have been making these for a few years now and for the Voyageur model.
https://c2.staticflickr.com/6/5312/1...d0241973_b.jpg
Re: John's Voyageur (rando) frame metal work
Saw that, but I had not noticed the flat tabs (to fix the bag?), and especially didn't get how the wire eyelets were made.
Re: John's Voyageur (rando) frame metal work
Beautiful work, as always, Dazza. Wow.
I'm curious, how many hours go into a completed rack?
Bill Bryant
Santa Cruz, CA
Re: John's Voyageur (rando) frame metal work
Quote:
Originally Posted by
Bill Bryant
Beautiful work, as always, Dazza. Wow.
I'm curious, how many hours go into a completed rack?
Bill Bryant
Santa Cruz, CA
Not really sure as I am always juggling many things during the day, but approx 40 hours and the bag mounts have to be fitted as well.
Re: John's Voyageur (rando) frame metal work
Quote:
Originally Posted by
Gattonero
Saw that, but I had not noticed the flat tabs (to fix the bag?), and especially didn't get how the wire eyelets were made.
I use moto cycle fairing clips, they have a 90 degree over lock function. Straps are so errrrrr!
https://c2.staticflickr.com/4/3862/1...7c31951f_b.jpg
https://c2.staticflickr.com/6/5595/1...3b3ddef0_b.jpg
https://c2.staticflickr.com/4/3860/1...d8f179ea_b.jpg
The wire eyelets start as 3/16" stainless tube, attack with 3/16" chainsaw file, then cut off each one and then de-burr, clean and brazed in place
post your cheque to the world wide head quarters of Llewellyn in sunny and hot Queensland Australia
Re: John's Voyageur (rando) frame metal work
Very neat, good to see how you got rid of all that faff with straps (that was a no-no for me regardin the Carradice Bagman).
BTW, what's the size of the bags?
Re: John's Voyageur (rando) frame metal work
Quote:
Originally Posted by
Gattonero
Very neat, good to see how you got rid of all that faff with straps (that was a no-no for me regardin the Carradice Bagman).
BTW, what's the size of the bags?
GB2086 front bag
rear is GB999
Waynes Llewellyn Lucentezza build pics
Wayne's Llewellyn Lucentezza frame set is under way. I feel an off the shelf handle bar stem does not compliment a nice bespoke frame set. I made fillet brazed stems for many years but I felt a lugged stem for lugged bikes was required for my production. In 2004 I set about on my first casting project. I made fabricated sample lugs and did 2D CAD drawings, tools were commissioned and the investment cast stainless steel stem lugs were born. They have real estate to the shorelines for a builder to simplify or elaborate upon. Since 2004 I have made many lugged stems to compliment Llewellyn frame sets. This stem lug set is destined for Wayne's Lucenteza frame set. If all goes well it will be at Bespoked 2017 in April (Bristol UK) before I ship to Wayne in California.
https://c1.staticflickr.com/1/745/32...53091fa1_b.jpg
https://c1.staticflickr.com/1/582/31...2fc16cf9_b.jpg
https://c1.staticflickr.com/1/464/32...b3a71776_b.jpg
https://c1.staticflickr.com/1/747/32...8d77438e_b.jpg
https://c1.staticflickr.com/1/401/32...503c72e0_b.jpg
https://c1.staticflickr.com/1/318/31...60cc0d82_b.jpg
https://c1.staticflickr.com/1/421/31...f5878c5d_b.jpg
https://c1.staticflickr.com/1/364/32...7e884823_b.jpg
https://c1.staticflickr.com/1/580/31...06b9d6cd_b.jpg
https://c1.staticflickr.com/1/569/31...68c54284_b.jpg
Re: Waynes Llewellyn Lucentezza build pics
For 12 years Columbus have supplied me 0.80mm wall Nivrocrom tube for making the Llewellyn lugged handle bar stems. This long and fruitful relationship with Columbus continues. This pic is of the first stage of mitering Wayne's stem tube that will be used with the cut lugs.
https://c1.staticflickr.com/1/597/31...3d862333_b.jpg
Wayne's Llewellyn Lucentezza
The Cadenzia lug set emanated from a discussion I had during a visit to Dario Pegoretti's workshops in Caldonazzo in 2009. The name comes from a South Australian wine that I like. This lug set fits XL or DOO size tubes . ("UOS" is a more recent marketed name for the same tube size) For Wayne's frame set I will use for the first time the final version of the new socket seat stay seat lug, which has larger flowing fillets to the surfaces for aesthetic desires.
https://c1.staticflickr.com/1/468/31...f97aa4de_b.jpg
https://c1.staticflickr.com/1/542/32...1140cec4_b.jpg
https://c1.staticflickr.com/1/329/31...c5ecd4d8_b.jpg
https://c1.staticflickr.com/1/433/32...6704041d_b.jpg
https://c1.staticflickr.com/1/574/31...3997c404_b.jpg
Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
A short break from the bench to admire
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
[QUOTE=Dazza;828043][COLOR="#0000FF"]This is the final version with revised fillets. I will have these lugs and frame sets with these lugs on show at Bristol "Bespoked" 2017. [/COLO
Are those seat lugs available for purchase yet please? Also, what is the diameter of the seat stay socket? I am pleased to learn that you will be at Bristol again. I publicised that elsewhere on here.
http://www.velocipedesalon.com/forum...how-46580.html
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
[QUOTE=Paul Jacobs;828183]
Quote:
Originally Posted by
Dazza
[COLOR="#0000FF"]
This is the final version with revised fillets. I will have these lugs and frame sets with these lugs on show at Bristol "Bespoked" 2017. [/COLO
Are those seat lugs available for purchase yet please? Also, what is the diameter of the seat stay socket? I am pleased to learn that you will be at Bristol again. I publicised that elsewhere on here.
http://www.velocipedesalon.com/forum...how-46580.html
I'm obviously not Dazza but I did remember him posting this. The seat stay ports are 17mm. Also, Dazza's linked post answers my question about there being a sloping top tube variety.
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
[QUOTE=Paul Jacobs;828183]
Quote:
Originally Posted by
Dazza
[COLOR="#0000FF"]
This is the final version with revised fillets. I will have these lugs and frame sets with these lugs on show at Bristol "Bespoked" 2017. [/COLO
Are those seat lugs available for purchase yet please? Also, what is the diameter of the seat stay socket? I am pleased to learn that you will be at Bristol again. I publicised that elsewhere on here.
http://www.velocipedesalon.com/forum...how-46580.html
Bristol "Bespoked" is a great gig, in a venue that is dear to my heart. (The original GWR Temple Meads station by Brunel) Great people and a fun time and some fine ales. I am looking forward to the trip.
17mm seat stays. Standard Columbus XL- DOO tubes. These new seat lugs will be available as an option in the Cadenzia and Crescendo lug sets some time in February.
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Whrrrrrrrrrrrrrrrr, whrrrrrrrrrrrrrrrrrr,
whrrrrrrr
https://c1.staticflickr.com/1/738/32...5fe48d55_b.jpg
file file file
https://c1.staticflickr.com/1/430/32...ed1771f4_b.jpg
scribble scribble (down under technical term for marking out)
https://c1.staticflickr.com/1/433/31...b3460d07_b.jpg
Whizzzzzzzzzzzzzzzzzzzzzzzzzz
https://c1.staticflickr.com/1/362/32...f11c0b91_b.jpg
file file file
https://c1.staticflickr.com/1/429/31...59ab3371_b.jpg
It is Wine o'clock, I am off to watch the Aussies chase the Pakistan total
I will finish this lug tomorrow
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
A wee bit more of the whrizzzzz, whrrrrr and file file
https://c1.staticflickr.com/1/553/31...7046d843_b.jpg
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
By the start of 2005 I was doing my own 3D CAD drafting, rather than farming it out and the resultant loss of interpretation from what was intended in my cranium to what the investment casting became. As an uneducated sod I jokingly called this process my PhD in frame making. I got the large text books and spent many evenings going through page by page the process of parametric modeling. I started simple and in steps escalated the complexity. In 2006 it was time to design and produce the Llewellyn dropouts. I took in the details of good dropouts I have used in the past and mixed in my desires. Lots of time on the 3D CAD program and after confirmations and tweaks via 3D printing some rapids, out of the mix came the dropouts. Hard to believe it was over ten years ago. Crikey! Wayne's drops are on the bench for a wee while of pondering.
https://c1.staticflickr.com/1/416/32...10b3cc93_z.jpg
https://c1.staticflickr.com/1/659/32...78ee1132_b.jpg
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set
"Whoops" "You stupid #%&*#!!!$*&##!! Wally! You will have to start again with another left hand drop"
Do you spot the mistake?
https://c1.staticflickr.com/1/732/32...a56224c5_b.jpg
Re: Wayne's Llewellyn Lucentezza Cadenzia frame set