-
Friday PicFest No.75
-
Re: Friday PicFest No.75
A batch of 54 Main Pivot Arms for the Journeyman's.
Op1 is a skim cut & end prep on the lathe to blank the 2" 6061 bar stock out.
http://farm5.static.flickr.com/4116/...20cec621_b.jpg
http://farm5.static.flickr.com/4118/...703c4cb6_b.jpg
Op2 is the first mill op that does the side that connects to the table pivot (aka, Smiley Face).
http://farm5.static.flickr.com/4139/...1f42601b_b.jpg
http://farm5.static.flickr.com/4081/...66f260be_b.jpg
Op2 almost done!
http://farm5.static.flickr.com/4074/...2749b92a_b.jpg
Op3 will be the final mill op that does the side you see! Should finish them up on Friday.
http://farm5.static.flickr.com/4093/...38430e5b_b.jpg
And our new covered parking project is underway!!!
http://farm5.static.flickr.com/4093/...ac61bfd3_b.jpg
-
10 Attachment(s)
Re: Friday PicFest No.75
Just more of the usual toil
and have I said lately
A lathe is a beautiful thing
-
Re: Friday PicFest No.75
-
3 Attachment(s)
Re: Friday PicFest No.75
I found these images of a frame I built about 10 years ago. How times change, even bicycles can't avoid fashion trends.
-
2 Attachment(s)
Re: Friday PicFest No.75
Hot Damn! Posting on Thursday for Friday and following Carl......don't think I ever learn!
First pic- Tramps just laying around the ole mailshack
Attachment 23576
Second pic- Since finding VS, you flame wielding hippie......sters got me itchen to burn one too. Got no clue what these things do but I shall return-Attachment 23584
Hey, seriously, this place rocks-
Thanks for lookin-
-
6 Attachment(s)
Re: Friday PicFest No.75
Seat lug progression on a frameset headed to Taiwan.
Dave
-
Re: Friday PicFest No.75
-
Re: Friday PicFest No.75
My shop is finally starting to become a reality.
Attachment 23596
-
Re: Friday PicFest No.75
-
2 Attachment(s)
Re: Friday PicFest No.75
This frame was finished last month, but it took some time to get it powdercoated. The theme is "clown fish".
KMO
-
4 Attachment(s)
Re: Friday PicFest No.75
-Front drop outs from Keith Anderson. They're cut from 4130 plate and have stainless inserts.
-Still hot Sachs crown.
-Groovin' a threaded steering tube on the mill.
-Showing some love for my metal zapping brothers and sisters.
-
11 Attachment(s)
Re: Friday PicFest No.75
The first few (painted ones) are out of the booth this morning. The last few are our answer to clean cable routing for bar-end cable housing along with a front Brevet bag.
Attachment 23650 Attachment 23655
Attachment 23652 Attachment 23658
Attachment 23656 Attachment 23653
Attachment 23659 Attachment 23660
Attachment 23651 Attachment 23654
Attachment 23657
-
6 Attachment(s)
Re: Friday PicFest No.75
part of the week is this fork.
-
Re: Friday PicFest No.75
-
Re: Friday PicFest No.75
-
7 Attachment(s)
Re: Friday PicFest No.75
Steel frames going through our pre-treatment process and some close ups of the welds and stainless bits:cheesy:
Sorry for the size of the pics....i'm certainly not a computer expert!
-
Re: Friday PicFest No.75
-
Re: Friday PicFest No.75
-
Re: Friday PicFest No.75