User Tag List

Results 1 to 2 of 2

Thread: Manipulating and Bending thin wall bicycle tubing

  1. #1
    Join Date
    Mar 2009
    Location
    Ohio
    Posts
    1,379
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Manipulating and Bending thin wall bicycle tubing

    Hey folks,

    Many questions get asked about the best process to bend thin wall tubing without deformation or wrinkling of the tube's profile. I thought I would take a moment to share a few thoughts that I've found pertinent.

    To successfully create perfect bends in thin wall tubing, regardless of material, requires tooling that meet a strict set of parameters;

    - The tube must be fully encapsulated at the bend moment by the forming dies, supporting the circumferential walls of the tube.

    - There must be a consistent, even draw pressure on the tube.

    - Once the wall thickness moves below about .028", internal mandrel support is necessary to prevent the material from collapsing even with meeting the previous two requirements, especially in alloyed material.

    With these three primary considerations met, it is possible to create acceptable bends in bicycle tubing for numerous applications.

    So what "bender" do I buy? It is important to recognize that there is not one single tool that can accommodate every manipulation need in bicycle fabrication. I have five different tools to create the many bent shapes used in my frames;

    - a custom C framed air over hydraulic bender for acute chainstay and seatstay profiles (Video 1)
    - a modified JD32 bender for acute bends in forks, down tubes, support structures (Video 2)
    - a custom 3 roll bender for long arcs used in seat tubes, top tubes, and some cruiser style tubing
    - an Anvil roll bender for sweeping shapes in stay material where I am not creating tire clearance
    - Various hand formers for small tubing such as racks, braces, and detail items

    Just as there is no one tool that can do it all, it is important to remember that there is no substitute for the right tool...no amount of sand, ice, cerro bend, etc will make up for poorly designed tooling that lacks any of the previous mentioned requisite characteristics. Will these aids help a hobbiest cheat a manipulation in a home environment? Yes, but they have no place in the professionals arsenal.

    Below are two short videos demonstrating distinct tube manipulations, both using titanium tubing.





    As I create more video examples showing the other bending tools, I'll update this thread.

    Best wishes,

    Rody
    Rody Walter
    Groovy Cycleworks...Custom frames with a dash of Funk!
    Website - www.groovycycleworks.com
    Blog - www.groovycycleworks.blogspot.com
    Facebook - https://www.facebook.com/pages/Groov...s/227115749408
    9
     

  2. #2
    Join Date
    Jan 2014
    Location
    Seattle, Washington, United States
    Posts
    9
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Manipulating and Bending thin wall bicycle tubing

    Great video! Thanks for sharing.
    1
     

Similar Threads

  1. Thin frame tube hole repair
    By gabareba in forum The Path
    Replies: 18
    Last Post: 09-13-2014, 09:16 PM
  2. Thin wood bowls/vessels
    By Bewheels in forum VSalon HandMade Gallery (non-cycling)
    Replies: 1
    Last Post: 07-05-2014, 06:06 AM
  3. Thin Steel/IF Factory Lightweight
    By dogrange in forum General Discussion
    Replies: 4
    Last Post: 04-26-2013, 11:32 PM
  4. The Wall
    By znfdl in forum The OT
    Replies: 5
    Last Post: 07-10-2012, 10:50 AM
  5. Bending very thin gauge aluminum tubing - suggestions?
    By 54ny77 in forum General Discussion
    Replies: 9
    Last Post: 12-31-2010, 12:19 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •