User Tag List

Results 1 to 20 of 131

Thread: Classic MTB and BMX pre-1996

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Aug 2008
    Location
    Flagstaff, Arizona
    Posts
    10,604
    Post Thanks / Like
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)

    Default Classic MTB and BMX pre-1996

    Pics, stories, links, what have you got?

    I love this shit.

    Here is me on my '89-90 Ala Carte

    - Garro.
    (How do I rotate photos?)

    IMG_7571.JPG
    Steve Garro, Coconino Cycles.
    Frames & Bicycles built to measure and Custom wheels
    Hecho en Flagstaff, Arizona desde 2003
    www.coconinocycles.com
    www.coconinocycles.blogspot.com

  2. #2
    Join Date
    Jan 2013
    Location
    santa barbara CA
    Posts
    566
    Post Thanks / Like
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Get pic into your computer photo album, rotate in edit there, drag and drop to imgur, copy and paste to wherever, that's what I do.


    img]
    Take care of yourself in this time of crisis and realize sadness, anger and grief are part of the process Brian Clare

  3. #3
    Join Date
    Oct 2015
    Location
    rio de janeiro
    Posts
    3,723
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    I have just put a new headset and purple fork. I bought a shimano 105 and it was too cheap... Seller didnīt know but itīs 27.0 not 26.4 race. BOth races up and down were off so i put a cane creek lower and a tange levin race w/ the shimano parts up.
    Anyways.. i saw a Fat Chance hanging from the celiling on a shop in NYC in late 1990. I had a mountain bike but didnīt even know what trail riding actually was. That Fat, either a wicked or Kicker, painted light yellow, had me in love. I could not buy it and never forgot that sight. A year later i was riding on trails in Brasil which have a similar character of the so called east coast mtb; slow, steep, slippery, tight, rocky, rutted. I was replacing bikes trying to find the one which would make me clear all sections. I was reading about the Yo Eddy as the ultimate bike on that environment and wanted on badly. Went back to the US and ended buying a Mikkelsen i found in a NYC shop because.. i donīt know.. but it worked. It had a tall bb, 17.25 cstays and oversized tubing. It was stiff and well balanced.
    Many years and a few bikes later i got an email on a vintage mtb forum asking if i wanted to buy a wicked lite.. Got the frame w/ a vicious fork and went searching for 1990 vintage parts. Built it w/ m737 but mixing w/ everything else because i like mongrels. TRied 3 other forks till i bought an old wicked fork.
    I moved to Mexico and took it w/ me. I was riding on the semi desert which is the opposite of east coast mtb. Bike felt great.
    NOw itīs back in Brasil and i got back to riding it. I wish i had this bike when the woods trail was still opened to riding. I have the bike. Now i need to find a trail.
    Attached Images Attached Images
    slow.

  4. #4
    Join Date
    Aug 2008
    Location
    Flagstaff, Arizona
    Posts
    10,604
    Post Thanks / Like
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by colker View Post
    I have the bike.
    Too Tall has the original fork, you know.......

    - Garro.
    Steve Garro, Coconino Cycles.
    Frames & Bicycles built to measure and Custom wheels
    Hecho en Flagstaff, Arizona desde 2003
    www.coconinocycles.com
    www.coconinocycles.blogspot.com

  5. #5
    Join Date
    Oct 2015
    Location
    rio de janeiro
    Posts
    3,723
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by steve garro View Post
    Too Tall has the original fork, you know.......

    - Garro.
    i have 2 wicked forks. One was made by Fat and the other is Tange, the purple one. Color is typical Fat City purple so it belonged on a Wicked some time in the past. The Fat City fork came to me painted in that dripping style of the late 80s and i stupidly repainted it in an ugly white.
    What is interesting though is i am almost sure the tange has smaller diameter legs. I donīt have a caliper but it seems to give more clearance for wide tires. ... I also like the clash of cherry and purple so it stays on the bike.
    slow.

  6. #6
    Join Date
    Oct 2015
    Location
    rio de janeiro
    Posts
    3,723
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by steve garro View Post
    Pics, stories, links, what have you got?

    I love this shit.

    Here is me on my '89-90 Ala Carte

    - Garro.
    (How do I rotate photos?)

    IMG_7571.JPG
    Great picture. Dark and deep.
    slow.

  7. #7
    Join Date
    Feb 2014
    Location
    New England
    Posts
    2,623
    Post Thanks / Like
    Mentioned
    5 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    A few bikes from years past. There was a 1984 Fuji Mt Fuji and an original Litespeed back when they only had one model in there somewhere but don't know where the photos are.

    1985 Fisher Mt. Tam
    Still have it.

    Untitled by Brian McLaughlin, on Flickr

    1989 or 1990 Fat Chance Wicked with custom paint.
    Long gone.

    Untitled by Brian McLaughlin, on Flickr

    1994 Moots YBB
    Won it. Rode it very briefly. Long gone.

    Untitled by Brian McLaughlin, on Flickr

    ~1996 (I think) Spot
    This is one the first batches that Mike G (founder of Spot) had made. One of my all time favorite bikes.

    Untitled by Brian McLaughlin, on Flickr

  8. #8
    Join Date
    Jun 2008
    Location
    Portland
    Posts
    1,679
    Post Thanks / Like
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Sean Canaan 94.jpg

    24hrs of Canaan in '94 in the early morning.
    Sean Chaney
    www.vertigocycles.com
    a peek behind the curtain

  9. #9
    Join Date
    Apr 2011
    Location
    Boulder County, Colorado
    Posts
    491
    Post Thanks / Like
    Mentioned
    3 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Oh geez I have lots of stories from this era...

    Onza Ti crankset. This project was already underway when I began working at Onza. The 1st gen crankset is the one with the round holes- these cranks had several problems: the pedal hole was too shallow (it was a blind hole) and the taper would bottom out on the BB spindle. These tended to fracture near the pedal spindle. The 2nd gen cranks had triangular windows- and these also fractured near the pedal spindle. This is where I came in. The first step was to verify the design using non destructive testing- this was done on a laser interferometric holography table (this was done at Garrett AiResearch.) The problem turned out to be the casting process (which was my initial assessment- long story behind that.) Even with chem milling and hot isostatic pressing they simply could not survive the stress. Since forging was out of the question due to cost I had two sample sets machined from solid (I got a deal on production material from Oremet.) The plan was to test them to failure on an Instron and compare the results to the leading market Shimano XT crankset at the time. If they passed I had a plan written up to produce a limited run of 1000 units. In the end the machined samples were produced ( I heard they were gorgeous) but never tested to my knowledge- I had already left to start Real Design. A total of around fifteen prototype cranksets were produced ( I broke two sets myself on my own bike.) They were never offered for sale. There were two prototype Aluminum versions, one which was extremely overbuilt and another that I did drawings for that was to be forged and produced in Taiwan but it never came to be.

    ticranks1 (1) by Jerome Kelty, on Flickr

    ticranks2 (1) by Jerome Kelty, on Flickr

    ticranksa (1) by Jerome Kelty, on Flickr
    “Be who you are and say what you feel because those who mind don't matter and those who matter don't mind.” - Dr. Seuss

  10. #10
    Join Date
    Oct 2015
    Location
    rio de janeiro
    Posts
    3,723
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by Honus View Post
    Oh geez I have lots of stories from this era...

    Onza Ti crankset. This project was already underway when I began working at Onza. The 1st gen crankset is the one with the round holes- these cranks had several problems: the pedal hole was too shallow (it was a blind hole) and the taper would bottom out on the BB spindle. These tended to fracture near the pedal spindle. The 2nd gen cranks had triangular windows- and these also fractured near the pedal spindle. This is where I came in. The first step was to verify the design using non destructive testing- this was done on a laser interferometric holography table (this was done at Garrett AiResearch.) The problem turned out to be the casting process (which was my initial assessment- long story behind that.) Even with chem milling and hot isostatic pressing they simply could not survive the stress. Since forging was out of the question due to cost I had two sample sets machined from solid (I got a deal on production material from Oremet.) The plan was to test them to failure on an Instron and compare the results to the leading market Shimano XT crankset at the time. If they passed I had a plan written up to produce a limited run of 1000 units. In the end the machined samples were produced ( I heard they were gorgeous) but never tested to my knowledge- I had already left to start Real Design. A total of around fifteen prototype cranksets were produced ( I broke two sets myself on my own bike.) They were never offered for sale. There were two prototype Aluminum versions, one which was extremely overbuilt and another that I did drawings for that was to be forged and produced in Taiwan but it never came to be.

    ticranks1 (1) by Jerome Kelty, on Flickr

    ticranks2 (1) by Jerome Kelty, on Flickr

    ticranksa (1) by Jerome Kelty, on Flickr
    Ooh.. those cranks. So.. they did exist.
    slow.

  11. #11
    Join Date
    Oct 2015
    Location
    rio de janeiro
    Posts
    3,723
    Post Thanks / Like
    Mentioned
    2 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by Bewheels View Post

    1994 Moots YBB
    Won it. Rode it very briefly. Long gone.

    Untitled by Brian McLaughlin, on Flickr

    ~1996 (I think) Spot
    This is one the first batches that Mike G (founder of Spot) had made. One of my all time favorite bikes.

    Untitled by Brian McLaughlin, on Flickr
    On a side note... i had an Avocet 02 saddle like that one in an exquiste light blue, like an italian Capri blue. I let a bike w/ my brother in one of the chapters of my nomadic life. My niece hated the saddle and it was swapped for something horrible. I still look on ebay if i can find the 02 in that color.
    slow.

  12. #12
    Join Date
    Aug 2008
    Location
    Flagstaff, Arizona
    Posts
    10,604
    Post Thanks / Like
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by Bewheels View Post
    A few bikes from years past.
    I sold quite a few of those original Spots from Mike & Jessica

    The were really, really nice bikes.

    I wish we could make light MTB's like that now but the ATCs are too long and the wheels too big.

    Good thing they are making Grovel bikes now so there is a use for all the 650 x 7/4/7 tubes

    - Garro.
    Steve Garro, Coconino Cycles.
    Frames & Bicycles built to measure and Custom wheels
    Hecho en Flagstaff, Arizona desde 2003
    www.coconinocycles.com
    www.coconinocycles.blogspot.com

  13. #13
    Join Date
    Aug 2008
    Location
    Flagstaff, Arizona
    Posts
    10,604
    Post Thanks / Like
    Mentioned
    10 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    Quote Originally Posted by colker View Post
    Great picture. Dark and deep.

    I had just lost 15 pounds in 4 days, I was 22 !!!!

    - Garro.
    Steve Garro, Coconino Cycles.
    Frames & Bicycles built to measure and Custom wheels
    Hecho en Flagstaff, Arizona desde 2003
    www.coconinocycles.com
    www.coconinocycles.blogspot.com

  14. #14
    Join Date
    Apr 2012
    Location
    Miami, Florida
    Posts
    15,893
    Post Thanks / Like
    Mentioned
    11 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    That is killer.

  15. #15
    Join Date
    Jun 2010
    Location
    The Mitten
    Posts
    1,342
    Post Thanks / Like
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)

    Default Re: Classic MTB and BMX pre-1996

    More old mtb podcast goodness:

    Second Spin Cycles | The Outdoor Route

Similar Threads

  1. Replies: 13
    Last Post: 08-18-2019, 09:38 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •