Likes Likes:  0
Results 1 to 10 of 10

Thread: Tubeless sealant and corrosion

  1. #1
    Join Date
    Sep 2008
    Location
    Vancouver, WA
    Posts
    469
    Post Thanks / Like

    Default Tubeless sealant and corrosion

    I just rebuilt a customer's wheel that was on a tubeless rim and spokes laced with alloy nipples. More than half of the nipples were so corroded that there was material missing from the part inside the rim--six nipples cracked inside the rim.
    All nipples show signs of corrosion--could this be from tubeless sealant and has anyone else seen this? FWIW, I rebuilt the wheel with brass nipples.
     

  2. #2
    Join Date
    Mar 2010
    Location
    NJ
    Posts
    1,334
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    yes, this was a thing, for sure. at one point shimano recommended against using sealant in their tubless wheels. i think the sealant manufacturers have caught up to this now though and have modified their solutions to be less corrosive, but not positive about that...

    Technical FAQ: Corroded rims and hot heads | VeloNews.com

  3. #3
    Join Date
    Feb 2013
    Location
    London, UK
    Posts
    4,053
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    I don't build wheels with non-anodized alluminium nipples, they are too easily subject to corrosion even without using a tubeless setup. The sealant may only accelerate a problem that is already there.
    Andrea "Gattonero" Cattolico, head mechanic @Condor Cycles London


    "Caron, non ti crucciare:
    vuolsi così colà dove si puote
    ciò che si vuole, e più non dimandare"

  4. #4
    Join Date
    Aug 2013
    Location
    Texas
    Posts
    142
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    Quote Originally Posted by Vancouverdave View Post
    ...tubeless rim...All nipples show signs of corrosion--could this be from tubeless sealant...
    No...
     

  5. #5
    Join Date
    Sep 2011
    Location
    Middle GA
    Posts
    4,825
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    What wheel?
    Dustin Gaddis
    Instagram
    Southern Wheelworks: Website - Facebook

  6. #6
    Join Date
    Oct 2012
    Posts
    5,790
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    The sealant shouldn't come in contact with the nipples imho. Non ano nipples are just a very bad idea.
    --
    T h o m a s

  7. #7
    Join Date
    Sep 2008
    Location
    Vancouver, WA
    Posts
    469
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    Front Roval carbon 29'er; black anodized nipples. Used Stan's sealant.
     

  8. #8
    Join Date
    Sep 2008
    Location
    Vancouver, WA
    Posts
    469
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    The more I build wheels (35 years and counting) the more I think that any non-brass nipples are a bad idea!
     

  9. #9
    Join Date
    Jun 2008
    Posts
    1,889
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    Quote Originally Posted by Vancouverdave View Post
    The more I build wheels (35 years and counting) the more I think that any non-brass nipples are a bad idea!
    I couldn't agree more.
     

  10. #10
    Join Date
    Sep 2011
    Location
    Middle GA
    Posts
    4,825
    Post Thanks / Like

    Default Re: Tubeless sealant and corrosion

    Quote Originally Posted by Vancouverdave View Post
    Front Roval carbon 29'er; black anodized nipples. Used Stan's sealant.
    I figured. It's extremely common with those wheels, rebuilt a set of those rims to some Hope hubs today actually, and it's not my first pair. My theory::

    They're built with hex head nipples. The heads get scratched during the build process, exposing bare aluminum. Or, being that they're DT nipples, they are scratched when brand new, with exposed bare aluminum. Sealant gets past the rim tape (the tire bed is pretty lousy and uneven on those rims, and IMO most shops don't do a great job taping rims), and then corrosion sets up and takes place.

    The ones I rebuilt today, there was so much moisture and sealant and general funk inside the rear rim I had to take it outside and rinse it out (as best as I could) and let it dry before rebuilding. Lots of little white aluminum oxide pieces and dust came out too. I used brass to be safe.

    I build alloy nips and carbon rims all the time and have never had an issue, but those Rovals are notorious for eating alloy nipples.
    Dustin Gaddis
    Instagram
    Southern Wheelworks: Website - Facebook

Similar Threads

  1. Tubeless tires, sealant in tubulars, and growing boogers
    By thollandpe in forum VSalon Pro-Bicycle Tech
    Replies: 27
    Last Post: 07-30-2016, 05:54 PM
  2. Tubeless sealant?
    By Colinmclelland in forum General Discussion
    Replies: 51
    Last Post: 05-23-2016, 04:05 PM
  3. Galvanic corrosion
    By progetto in forum The Path
    Replies: 2
    Last Post: 04-22-2014, 01:09 AM
  4. corrosion of ti
    By WadePatton in forum General Discussion
    Replies: 24
    Last Post: 09-26-2009, 12:12 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •