Page 53 of 56 FirstFirst ... 4344454647484950515253545556 LastLast
Results 1,041 to 1,060 of 1104

Thread: 44 Bikes

  1. #1041
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Heat

    Quote Originally Posted by Rayburn Shaun View Post
    Kris-

    Your porno shots are off the charts bonkers. Much respect. Can I ask if you are pulsing on the machine or doing beads manually? Nice work and big fan here.=)

    Thanks and nice welds, Brother,

    Tom
    Thanks for the kind words Tom. As per pulse or manual beads: It depends where I am on the frame and how much power I need. I'd say most of the time I am pulsing with specific amperage settings, peak and background. Most times I manually weld is some spots on the bottom bracket and towards the inside of the frame where the seat / chain stays connect with Paragon's hooded dropouts (it gets quite thick here). But most times it's all pulse. I find I can regulate my heat control and timing a bit better this way? Since welding Titanium, all my pulse settings actually changed in steel as a result of that learning process. I have a lot more control and power now I think.

    Here's a shot from today's effort:



    To give you an idea, settings here are:

    120 AMPS
    25% Peak
    9% Background
    5 SCFH Purge
    15-20 SCFH at the Torch
    15 Second Post Flow
    Pre-Flow is something like 2-5 seconds
    No. 10 Alumina Nozzle with 1/16 Lanthanated Tungsten and matching gas lens
    .035" Weldmold 880T Filler all day every day
    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  2. #1042
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Huntsman // Shimano 105 2x11

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  3. #1043
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Marauder // Bikepacking Mode

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  4. #1044
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Closer to Organized

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  5. #1045
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default 44 Bikes Chopper Dropper

    Been working on this one for a LONG time... The suspension has been killing me.

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  6. #1046
    Join Date
    Nov 2011
    Location
    NE Ohio
    Posts
    361
    Post Thanks / Like

    Default Re: 44 whips

    Serious Heavy Metal Thunder of Dirt.
     

  7. #1047
    Join Date
    Mar 2012
    Posts
    3
    Post Thanks / Like

    Default Re: Closer to Organized

    Quote Originally Posted by fortyfour View Post
    Does that JetFire have all his armor bits? Love all the work and content you share here and on GarageJournals, thanks!
     

  8. #1048
    Join Date
    Mar 2009
    Location
    worlds biggest island
    Posts
    1,522
    Post Thanks / Like

    Default Re: 44 Bikes Chopper Dropper

    What trail number did you end up with?
    Quote Originally Posted by fortyfour View Post
    Been working on this one for a LONG time... The suspension has been killing me.

    Bill Fernance
    Bicycle Shop Owner
    Part Time Framebuilder
    Bicycle Tragic

  9. #1049
    Join Date
    Jan 2009
    Location
    Falls Church, VA
    Posts
    4,469
    Post Thanks / Like

    Default Re: 44 Bikes Chopper Dropper

    Quote Originally Posted by progetto View Post
    What trail number did you end up with?
    Appalachian, by the looks of it.

  10. #1050
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Marauder // XT M8000

    Prismatic Chameleon Sapphire Teal over a base coat of Jungle Grey. This powder really dramatically shifts in sunlight.



    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  11. #1051
    Join Date
    Jun 2011
    Posts
    56
    Post Thanks / Like

    Default Re: 44 Bikes

    I've never seen that shade of black before. Love it.
     

  12. #1052
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default 27 Plus

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  13. #1053
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default The Eagle Has Landed...

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  14. #1054
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default New Man Tooling // Di-Acro No. 4

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  15. #1055
    Join Date
    Mar 2014
    Posts
    98
    Post Thanks / Like

    Default Re: 27 Plus

    Quote Originally Posted by fortyfour View Post
    epic colour ! specially with that flake !

    i just read your machine settings while welding steel, would you mind giving some pointers on ti, im muckimg around with ti and would love some input from the pro's?
    thanks, mick
    Thank, mick van aar

  16. #1056
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Re: 27 Plus

    Quote Originally Posted by michäel2
    epic colour ! specially with that flake !

    i just read your machine settings while welding steel, would you mind giving some pointers on ti, im muckimg around with ti and would love some input from the pro's?
    thanks, mick
    Hi Mick-

    When you say machine settings for steel, are you referencing these?

    120 AMPS
    25% Peak
    9% Background
    5 SCFH Purge
    15-20 SCFH at the Torch
    15 Second Post Flow
    Pre-Flow is something like 2-5 seconds
    No. 10 Alumina Nozzle with 1/16 Lanthanated Tungsten and matching gas lens
    .035" Weldmold 880T Filler all day every day


    If so, those are my current steel settings (I've posted different iterations earlier which I no longer use FYI). Just want to be sure we're referencing the same numbers.
    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  17. #1057
    Join Date
    Mar 2014
    Posts
    98
    Post Thanks / Like

    Default Re: 27 Plus

    yes, thanks, i thought you where referring to steel there ?
    Thank, mick van aar

  18. #1058
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Re: 27 Plus

    Quote Originally Posted by michäel2 View Post
    yes, thanks, i thought you where referring to steel there ?
    I am, correct but I just wanted to make sure you were referencing those which are similar to my Ti settings.

    One thing about Ti is that settings can be dependent on the work space too. So what works in my shop, may need to be tweaked for yours. Peak % and my cup size change to #12 along with a few tweaks in post flow and filler (.045 and .065 in specific spots). Amperages also change depending on where I am on the frame and what connections I'm working on. Good luck!
    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  19. #1059
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Steady as She Goes...

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

  20. #1060
    Join Date
    Jun 2009
    Location
    New Hampshire
    Posts
    3,032
    Post Thanks / Like

    Default Marauder 1x11

    Waiting on Fox to ship a Transfer Dropper post // Thomson Stunt Double Seat Post Stand-in..

    Kristofer Henry : 44 BIKES : Made to Shred™
    www.44bikes.com · Flickr · Facebook · Instagram

Similar Threads

  1. S and S bikes here
    By Manumai in forum VSalon Cycling Gallery
    Replies: 34
    Last Post: 08-14-2012, 10:53 AM
  2. Anybody looking for 57 tt bikes?
    By suspectdevice in forum General Discussion
    Replies: 8
    Last Post: 05-18-2012, 09:12 AM
  3. Head bikes or heart bikes?
    By baldbones in forum General Discussion
    Replies: 13
    Last Post: 10-23-2011, 01:11 AM
  4. Fat Bikes, should I?
    By billrick in forum General Discussion
    Replies: 33
    Last Post: 01-10-2011, 01:34 AM
  5. Insuring Bikes
    By armagh in forum General Discussion
    Replies: 9
    Last Post: 12-22-2010, 02:45 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •