Source for Individual Surface Conditioning Belts?

[drietz]

Looking for one of each of the Scotch-Brite belts for my own home frame "conditioning."

Probably like 3/4"-2" x ~12-20" belts. Not even sure what's out there.

Anybody? Figured the framebuilders would know best.

[echelon_john]

Scotch-Brite Surface Conditioning Belt, 48" Length x 2" Width, Very Fine, Blue (Pack of 1): Amazon.com: Industrial & Scientific

[drietz]

John - should I not even bother with the other two grades?

[echelon_john]

If it's just for light 'touchup' work to even out the finish a couple of times a season I'd start with a very fine grit. 80 grit scotchbrite takes a pretty good bite; this one will have more of a polishing effect and less of an etching one.

[illcomm33]

I have been getting mine from Mike @ Abrasive Specialties (1-262-966-7566) Granted he is making them for me and my HF 13" pneumatic air sander (which has actually been very good....can't beat $20 vs the cost of a Dynafile!) He sells them individually and I have been happy with both the red and blue belts. Just make sure to ask him about the shipping (alternatives!) as it is a tad high for the lightweight belts. Let me know if you need his email address.