La Richard Sachs Piccoli Gioielli sono finalmente arrivati atmo -

The little jewels have arrived atmo -

Richard Sachs Piccoli Gioielli Dropouts | RICHARD SACHS CYCLES



http://farm8.staticflickr.com/7205/6...ac5be5e6_z.jpg

http://farm8.staticflickr.com/7054/6...85372aec_z.jpg

Richie,
My sets just arrived in Oviedo. Holy smokes, you've raised the bar. I can't wait to use them. I have to say they are little jewels.

Post up here when the fronts are available. Looking forward to trying them.

Thanks Richard! The dropouts are beautiful. They are my new favorite part of FrankenFrame.

Now if I only had the skill to join 'em without cutting a cheater slot. Someday. Someday. :-)

Attachment 40010Attachment 40011

Quote:

---

Originally Posted by Craig Ryan

Post up here when the fronts are available. Looking forward to trying them.

---

Finally atmo the fronts are here and available. The 64 degree rears have also arrived.
Look here - Richard Sachs Framebuilding Material | RICHARD SACHS CYCLES



http://farm8.staticflickr.com/7088/7...91407b74_c.jpg

Looks awesome Richie! May I ask are those rear dropouts made for 12.5 mm ends? How about the wall thickness for the SS/CS?

Quote:

---

Originally Posted by suhacycles

Looks awesome Richie! May I ask are those rear dropouts made for 12.5 mm ends? How about the wall thickness for the SS/CS?

---

The mating areas are a bit omnidirectional and will engage diameters between
12.5mm and about 12.8mm with no problem. Here is a partial schematic atmo.
The parts were designed with the PegoRichie dimensions first and foremost.


http://farm8.staticflickr.com/7071/7...94ff51c9_c.jpg

Cool... thanks for the 411. Look forward to trying them someday...=)

Dear E-Ritchie,
What is the plug diameter on the Piccoli Gioielli front dropouts ?

Will there be a Frenchie version with mudguard eyelets ? You could call them the "Petite Mort" . . .

Quote:

---

Originally Posted by Scheisserad61

Dear E-Ritchie,
What is the plug diameter on the Piccoli Gioielli front dropouts ?

---

The shelf is in the 14.2mm range and the spigot is a slide fit into an SL clade.

Long time waiting atmo - stainless Piccoli Gioielli fronts are finally in stock.
Also, the materials page has been updated.
Richard Sachs Framebuilding Material | RICHARD SACHS CYCLES

Thanks.

Quote:

---

Originally Posted by e-RICHIE

Finally atmo the fronts are here and available. The 64 degree rears have also arrived.
Look here - Richard Sachs Framebuilding Material | RICHARD SACHS CYCLES



http://farm8.staticflickr.com/7088/7...91407b74_c.jpg

---