VELOCIPEDE SALON - Classifieds Classic http://www.velocipedesalon.com/forum/ $100: Buyers or Sellers use the honor system for giving back a small portion of each sale to the salon. This is yours to negotiate Use the donate button or PM Too Tall for instructions]]> en Thu, 20 Jun 2013 07:02:34 GMT vBulletin 60 http://www.velocipedesalon.com/forum/images/misc/rss.png VELOCIPEDE SALON - Classifieds Classic http://www.velocipedesalon.com/forum/ FS: Peg Respo 54 http://www.velocipedesalon.com/forum/f3/fs-peg-respo-54-a-33417.html Wed, 19 Jun 2013 21:08:20 GMT Bought this from another member and to be honest it is just too stiff for me at the moment. My injury still bothers me on this bike so sticking to...
Bought this from another member and to be honest it is just too stiff for me at the moment. My injury still bothers me on this bike so sticking to my bikes with fatty tires and with the incoming Zank the garage is full
Near mint condition pegoretti responsorium 54 cm
In the very rare white and green catch the spider scheme
Frame fork headset seatpost and cable stops are included
3200 shipped. 5% back to the salon. Paypal ok if you cover the fees
More info now that I am home"
It is the falz fork painted to match. Stem is pretty much slammed. Headset is the king non d11 headset in black although I have a silver one if you prefer. The seatpost is a WR composti in 29.4. I'll include super record ut cups in italian.
If you need more parts up to a complete campy build, I am sure we can work something out

Will consider partial trade for nice campy wheels ; otherwise I am all set

Pm or email rpavlicek@att.net if you'd like more info


Attached Images
]]> Classifieds Classic Ryun http://www.velocipedesalon.com/forum/f3/fs-peg-respo-54-a-33417.html Fs: Fizik arione wing saddle http://www.velocipedesalon.com/forum/f3/fs-fizik-arione-wing-saddle-33416.html Wed, 19 Jun 2013 18:52:06 GMT 130 x 300mm Fizik Arione "Wing" saddle. Ti seat rails. Near mint condition. Near 300 clean, safe miles. Asking $59, free shipping within CONUS.

photo-1 11.11.45 AM.JPG
photo 11.11.48 AM.JPG
photo-2 11.11.41 AM.JPG
Attached Images
]]> Classifieds Classic Brian E Hammer http://www.velocipedesalon.com/forum/f3/fs-fizik-arione-wing-saddle-33416.html <![CDATA[Fs: New campagnolo centaur 10 speed cassettes 13-26 & 13-29]]> http://www.velocipedesalon.com/forum/f3/fs-new-campagnolo-centaur-10-speed-cassettes-13-26-13-29-a-33407.html Tue, 18 Jun 2013 22:13:38 GMT Two of the remaining casualties from my decision to go to the Athena gruppo rather than the 10 speed Veloce. Both cassettes are brand new with... Two of the remaining casualties from my decision to go to the Athena gruppo rather than the 10 speed Veloce. Both cassettes are brand new with original packaging. $100ea, free shipping within CONUS, 5% to VS coffers.....

Centaur 13-26.JPG
Centaur 13-29.JPG
Attached Images
]]> Classifieds Classic Brian E Hammer http://www.velocipedesalon.com/forum/f3/fs-new-campagnolo-centaur-10-speed-cassettes-13-26-13-29-a-33407.html WTB/WTT: Thomson stem, Campy medium cage RD http://www.velocipedesalon.com/forum/f3/wtb-wtt-thomson-stem-campy-medium-cage-rd-33405.html Tue, 18 Jun 2013 17:51:08 GMT Hey everyone. Looking for a couple of things for a super-awesome bike that's gonna be coming together (pictures to ensue after build):

1) Thomson X2 stem, 130mm, -17 degree in SILVER (I know, it's a long shot)


2) Campy medium cage rear derailleur. I have a Chorus carbon short cage RD that I would be willing to trade.

Thanks!

Pettit ]]> Classifieds Classic petitelilpettit http://www.velocipedesalon.com/forum/f3/wtb-wtt-thomson-stem-campy-medium-cage-rd-33405.html <![CDATA[FS: CAMPAGNOLO VELOCE 8spd DT SHIFT LEVERS & 10SPD INDEX RATCHET]]> http://www.velocipedesalon.com/forum/f3/fs-campagnolo-veloce-8spd-dt-shift-levers-10spd-index-ratchet-33402.html Tue, 18 Jun 2013 15:32:58 GMT At one point, I was going to base the drivetrain on my Guerciotti around a 10 speed setup. Ultimately, I ''caved'' and went with the 11 speed Athena gruppo. Thus, I have 2 pairs (NOS primary and spare) of the subject levers and tough to source index ratchets to make the conversion from 8spd to 10spd. $65ea or $100 for both.

photo.JPG
photo-1.JPG
photo-2.JPG
Attached Images
]]> Classifieds Classic Brian E Hammer http://www.velocipedesalon.com/forum/f3/fs-campagnolo-veloce-8spd-dt-shift-levers-10spd-index-ratchet-33402.html Fs: Campagnolo record brake lever set (carbon) http://www.velocipedesalon.com/forum/f3/fs-campagnolo-record-brake-lever-set-carbon-33390.html Mon, 17 Jun 2013 19:25:21 GMT Campagnolo Record brake lever (carbon) set. Complete, fully functional, basically flawless set of levers. $119. Free shipping within CONUS. Usual... Campagnolo Record brake lever (carbon) set. Complete, fully functional, basically flawless set of levers. $119. Free shipping within CONUS. Usual plus up to the VS "kitty" upon consummation of a deal.

photo.JPG
photo-1.JPG
Attached Images
]]> Classifieds Classic Brian E Hammer http://www.velocipedesalon.com/forum/f3/fs-campagnolo-record-brake-lever-set-carbon-33390.html FS: BONTRAGER RACE X LITE 27.2 x 250 CARBON SEAT POST http://www.velocipedesalon.com/forum/f3/fs-bontrager-race-x-lite-27-2-x-250-carbon-seat-post-33387.html Mon, 17 Jun 2013 17:11:25 GMT This Post occupied my Seven Odonata for a couple years. Worked flawlessly throughout that time. Never involved in a tip over, crash etc. New project... This Post occupied my Seven Odonata for a couple years. Worked flawlessly throughout that time. Never involved in a tip over, crash etc. New project has me pursuing a polished aluminum post and thus, this one (hopefully) gets a new home. Asking $59 w/free shipping within CONUS. VS "kitty'' gets 5% of the sales price.
Attached Images
]]> Classifieds Classic Brian E Hammer http://www.velocipedesalon.com/forum/f3/fs-bontrager-race-x-lite-27-2-x-250-carbon-seat-post-33387.html FS: SHIMANO XTR 9 SPEED CS-M960 11-32 (ba group) CASSETTE w/LOCK RING http://www.velocipedesalon.com/forum/f3/fs-shimano-xtr-9-speed-cs-m960-11-32-ba-group-cassette-w-lock-ring-33386.html Mon, 17 Jun 2013 16:37:17 GMT At one point I thought I was going to dabble in Mt Biking but that "itch" has gone quiet. Thus, a basically new XTR cassette is up for grabs. Asking $69 with free shipping (CONUS. 10% of the sales price goes to bolster the "VS" beer fund er, keeping the lights on and forum humming.....

photo-3.JPG
Attached Images
]]> Classifieds Classic Brian E Hammer http://www.velocipedesalon.com/forum/f3/fs-shimano-xtr-9-speed-cs-m960-11-32-ba-group-cassette-w-lock-ring-33386.html Tall guy bikes FS, 1 custom steel, 1 production Al http://www.velocipedesalon.com/forum/f3/tall-guy-bikes-fs-1-custom-steel-1-production-al-33385.html Mon, 17 Jun 2013 16:35:08 GMT These two lovely bikes just aren't getting enough action around here anymore. I've moved on to other bikes and I hate seeing these go to waste, would love to send them on to a new home to get ridden appropriately.

1st up - Custom Scott Quiring road bike. Build around 2008-2009. Mix of Deda Zero and Zero Uno tubing. Rides really nice like it should. Nice paint job, color matched Reynolds Ouzo fork. Not a scratch on it anywhere I can find. Built up with all alloy Campy Centaur 10speed. Silver King HS, silver Thompson 0-offset post and 130mm stem. (I have an identical 120mm stem if you'd prefer). Ritchey WCS classic bars 44cm. Stainless King cages - hand polished. Geo- TT 58.5cm, HT - 20cm, ST - 61 c-t. Only about 2-3k miles on the whole thing. Would really like to keep the wheels, I've got a Shimano freehub body to swap on there and have a use in mind for them. If you really want them I can probably be talked into selling them though. What is NOT included - pedals and saddle.

QuiringWEB.jpg

Next - Specialized E5. Got this as a backup bike to keep at my apartment when I was trying to live in 2 places at once. Now that I'm all in one place it doesn't get used much. Bought from a grassroots racing team as a spare frame at the end of a season that had never been built up. Built with 1st Gen alloy SRAM Rival except for a Dura-ace crankset. Deda short&shallow classic drops 46cm (outside-outside). 130mm Easton EA90 stem with decals acetone'd off. There isn't a model name on this bike since it was for a race team it just says "Specialized" everywhere. It's basically an E5-Aerotec Aluminum S-works with carbon rear-stays from what I can tell. Can't find a geo chart on their website that really corresponds but based on my measurements its 59cm TT, 18cm HT, 57cm actual ST, (effectively about 62cm if non dropped TT). Very low miles, perfect condition (never even got around to trimming the fork steerer). Light and snappy. What is NOT included - pedals, saddle, wheels.

SpecE5web.jpg

Interested or have any questions or want to talk $$ please EMAIL me at: tristanDOTcarnesATgmailDOTcom. I'm not really interested in parting these out at the moment, FYI.
Attached Images
]]> Classifieds Classic TACSTS http://www.velocipedesalon.com/forum/f3/tall-guy-bikes-fs-1-custom-steel-1-production-al-33385.html FS / Swap - Long Shot: My Baum http://www.velocipedesalon.com/forum/f3/fs-swap-long-shot-my-baum-33382.html Mon, 17 Jun 2013 09:59:47 GMT I haven't ridden this for a while for various reasons - mainly because the geometry is a little too upright for me now - and it's now stripped bare due to re-assigning parts for my next project (as well as being made an offer on the Di2 parts that I couldn't refuse). With the bare frame just hanging there now I can't help but think it should be put to better use.



This setup as pictured cost me $9k. Yes, that stings a little over two years down the line - and I know I'll be unlikely to get a 'comfortable percentage' of that (whatever that may mean) back through selling it. Part of me is contemplating a soda blast to strip it back to raw Ti and rebuild it with 9070 Di2 or EPS (and there's a slightly sick side of me that wants to put an eccentric BB adaptor in the PF30 shell and run it singlespeed with riser bars and a PDW basket [I really want to do this, but it'd be heresy!]). In reality though I think it's just time to move on...

Sale offers are likely to make me cringe and/or rock quietly in the corner. Part of me wants to visit my LBS and see if he'll swap it for a C59 frameset, but (despite the cost of a C59 to him being less than 1/3rd of the cost of this was) I reckon I'd get laughed out of the shop.

It's basically as it was when it left Baum. The paint is mostly immaculate, as is the raw Ti that's on show. There's two points to note: firstly that the paint for about 10mm below the bottom edge of the ISP topper is scuffed (from using a longer PMP ISP topper - of which I can also supply two), and secondly that the matching custom painted saddle is slightly scuffed around the edges. It'll come with the 110mm Tune stem, the ISP topper, custom painted San Marco Superleggera carbon saddle, the PF30 BB (which was replaced not that long ago) and the 7090 Di2 wires left in it (with battery mount on the non-drive side chainstay). The fork is an Enve 1.0 and the headset is a Tune Bobo. I've also got the Mcfk carbon derailleur band that I used for the Di2 front mech.

There's endless pics of it in various guises here, but this is probably the one I like the most:



It was also featured on CycleEXIF.

The geometry is essentially the same as this but with a 55.5cm top tube and a 19cm head tube (I can't find the final signed off version):

[I'll edit and upload when I can get attachments to work!]

In the interest of total transparency, it was repaired by Baum around a year ago as the ISP developed a crack. Darren Baum repaired it himself and told me the frame is probably better than when it left him originally (he claims nobody in the factory could tell where the repair was even on the raw Ti when he was done). There's zero risk of the same thing happening again as he sleeved the area (i.e. where the seat tube becomes the ISP at the TT join) with a thin piece of Ti tubing to strengthen it and eliminate the risk of a repeat. The frame and fork received a total respray at the time to ensure no colour mismatch, and I've probably only put 750km on it since.

Basically, does anyone have anything they'd be interested to swap? I'm interested in complete bikes or equally boutique (but not necessarily as pricey) framesets, part projects, fancy wheelsets (potentially)... The main hurdle to all of this is that I'm in Australia (Sydney) and most of the VSalon are US-based. Regardless, if you don't ask you don't get.

PM me if you have something to offer. ]]> Classifieds Classic RichTheRoadie http://www.velocipedesalon.com/forum/f3/fs-swap-long-shot-my-baum-33382.html FS: Busyman bar tape - Black leather + purple stitch http://www.velocipedesalon.com/forum/f3/fs-busyman-bar-tape-black-leather-purple-stitch-33381.html Mon, 17 Jun 2013 04:45:54 GMT I got this tape done specifically for _this Cycle EXIF photoshoot_ (http://www.cycleexif.com/baum-coretto-purple-art). The bike was stripped down... I got this tape done specifically for this Cycle EXIF photoshoot. The bike was stripped down afterwards, and when I rebuilt it I used white tape. This tape was never tightly wrapped, nor was it fitted how Mick (the Busyman) says you should (i.e. soaked in water so that it tightens against the bar and shapes on drying - it was literally fitted one day, shot the next and removed the next day (I did have every intention of using it again, but never did). It is cut to wrap a 40cm bar so if you run a wider bar it could come up short. I do have a couple of sticky black 'cheat strips' cut to tape the lever clamps to send with the tape.



Anyway, it's sat in my spares box doing nothing - if someone wants it I'll pass it on. It cost me $130 (AUD). It'll probably cost me $30 or so to send to the US. If you're interested I reckon on an expensive-but-worth-it $85.

Not advertising because I need to get rid - just sticking it up in case it can be better used than sat in a box... ]]> Classifieds Classic RichTheRoadie http://www.velocipedesalon.com/forum/f3/fs-busyman-bar-tape-black-leather-purple-stitch-33381.html Brooks Swift TI Black http://www.velocipedesalon.com/forum/f3/brooks-swift-ti-black-33371.html Sun, 16 Jun 2013 12:12:59 GMT I have a very lightly used Brooks Swift with Titanium rails in Black. Used about 1 month then taken off bike and has sat in original box for about 1... I have a very lightly used Brooks Swift with Titanium rails in Black. Used about 1 month then taken off bike and has sat in original box for about 1 year.

Asking $150 plus shipping.

Thanks!
Attached Images
]]> Classifieds Classic Gordon http://www.velocipedesalon.com/forum/f3/brooks-swift-ti-black-33371.html WTB: ti seatpost http://www.velocipedesalon.com/forum/f3/wtb-ti-seatpost-33368.html Sun, 16 Jun 2013 00:46:23 GMT Looking for a ti seatpost, syncros or something similar 27.2 Looking for a ti seatpost, syncros or something similar 27.2 ]]> Classifieds Classic Stormy Arthur http://www.velocipedesalon.com/forum/f3/wtb-ti-seatpost-33368.html PSA: coupled Seven on the eBay http://www.velocipedesalon.com/forum/f3/psa-coupled-seven-ebay-33366.html Sat, 15 Jun 2013 22:39:43 GMT I'm not one for posting random heads-up's for stuff...but this Seven is not listed as having S&S Couplers in the listing title, though it does have them.

Seems like it might go for a reasonable sum of money. I'd be tempted myself but I'm happy with the S&S cross bike I have, particularly after making a couple changes recently.

Seven Cycles Axiom Frame 56cm Steel | eBay

Darren & Co.: please delete if this is out of bounds, but I figured it was worth enlightening the gang. ]]> Classifieds Classic robin3mj http://www.velocipedesalon.com/forum/f3/psa-coupled-seven-ebay-33366.html a few Rival bits http://www.velocipedesalon.com/forum/f3/few-rival-bits-33355.html Fri, 14 Jun 2013 16:09:36 GMT a few new Rival bits floating around: Image:... a few new Rival bits floating around:


brakeset- $100

S500 BB30 Crankset 53/39 170mm comes with BB30 and PF30BB- $150

prices include domestic USPS shipping.

info@spookybikes.com for more info/buy crap ]]> Classifieds Classic suspectdevice http://www.velocipedesalon.com/forum/f3/few-rival-bits-33355.html